Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

At work, I'm using a Fujitsu Lifebook E series laptop, along with a HP ZR22w secondary screen, connected on DisplayPort. My OS is Windows XP, fully updated, but without Admin privileges

As soon as the screens shut themselves down (power off, or automatic sleep mode after idling too long), the Windows configuration for my screens (extended desktop, and relative positions of the screens) disappear. But when I go to Windows display settings, they seem unchanged. I have to mess them up and redo them right to retrive my previous configuration. This also happens when I shut down manually the secondary screen (using power off button).

Given that I have no admin privileges, it is not possible to use a software like UltraMon. I used a similar configuration at home for several months, and I never had any problem like that.

Any idea how to fix that?

share|improve this question
    
XP is lousy about this with certain video driver configurations, I'm afraid. If you can't use something like UltraMon there's probably no workaround. –  Shinrai Oct 3 '11 at 14:17
    
No offense, but I sincerely hope you're wrong... It kills me to redo my graphic setup 4 times a day... –  Squ36 Oct 3 '11 at 15:24
    
I wish I was wrong, but in my experience XP is lousy with this. Now that I reread this, though, I notice it happens when you power off the screens...I think I read this wrong on the first pass. Out of curiosity, is that just a DisplayPortM to DisplayPortM cable? (There's a reason I'm asking) –  Shinrai Oct 3 '11 at 15:49
    
Yeah it is. And i forgot to add that the laptop end of the cable is not actually plugged directly on my laptop, but rather on its dock –  Squ36 Oct 3 '11 at 16:01
    
Here's a test you should do - find a DisplayPort to DVI adapter and try running the monitor off that. I have seen certain DisplayPort cables and ports that don't properly manage the power on pin 20, and I've seen certain monitors that this can cause to behave strangely - if you do this to a Dell U2410 it refuses to power on whatsoever with the cable plugged in! The adapter would eliminate this, so it's a good test (and possibly a long term workaround). Alternatively, if that dock has DVI, just do DVI-DVI. –  Shinrai Oct 3 '11 at 16:07

1 Answer 1

Ask your IT department to install the latest video drivers, BIOS firmware, and chipset drivers (just ask them to update all of them, if they will). Power management issues are nearly always driver-related, and updating the drivers can fix many of these sorts of issues.

share|improve this answer
    
My computer is already fully updated (as of early September) –  Squ36 Oct 4 '11 at 7:14

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.