Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I have been looking at "universal wifi adapters" (ethernet in/wifi out, looks like ethernet from the client side but speaks wifi) like the netgear wnce2001 for bridging the ethernet from a switch to another room via wifi. The product specs of those devices only talk about devices like video game consoles and TVs, but not about switches.

Would they work with switches or are they hardwired to talk to only one device? What else could I use to connect my switch wireless to my wifi router, apart from "powerline" stuff?

share|improve this question

3 Answers 3

up vote 2 down vote accepted

A WiFi adapter like the Netgear WNCE2001 is also called an access point operating in client mode. Typically the AP can only support one client device on the wired end, so a switch cannot be connected.

A wireless router (or an AP with routing features) operating in wireless bridge mode will provide the functionality you're asking for. You may have to use alternate firmware like DD-WRT if the stock firmware doesn't offer that mode. See a similar question/answer here

share|improve this answer
    
You're right, the WNCE2001 doesn't seem to be a real bridge. There are Linksys/Cisco products that'll do the trick, look for WET200 or WET610N –  trurl Oct 15 '11 at 9:52
    
OK. I have an older router somewhere maybe it can be put into bridge mode. Need to check for model... –  EricSchaefer Oct 15 '11 at 11:10

the WNCE2001 DOES indeed act like a bridge as I have it connected to a 24 port switch (via WIFI) Works like a charm.

It does work, just not stated officially anywhere

share|improve this answer

If this device is a wireless bridge, you can connect whatever device you like to it, even a switch (and other devices to the switch). If you need vlan-tagging or multicast you may run into some problems, but most likely you don't need those features at home (exception: IPTV).

share|improve this answer
    
None of those features are needed. The switch only serves a PC, a couple of old SPARCstations and a printer... –  EricSchaefer Oct 15 '11 at 11:12

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.