Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I changed my screen resolution from 800x600 to 1280x1074 and now Windows starts up but there is no display and a message comes on a black screen saying Input not supported. I can only start Windows in safe mode.

I checked in safe mode but there was no restore point available. I am using Windows 7. How can I get my screen resolution back?

EDIT: i tried setting the resolution to 800x600 in safe mode and rebooting but still the screen remains black. Also i enabled the 600x480 mode but still the same.

share|improve this question
    
    
You're enabling it from the Boot options screen not from within the desktop. Boot into the desktop, change the resolution. Even if it's set to 800x600, reset it & boot back to normal mode. –  Sathya Oct 28 '11 at 7:20
    
@Sathya i have done exactly what you have mentioned. Logged into safe mode, changed the resolution to 800x600 and rebooted into normal mode. but still the black screen appears –  lovesh Oct 28 '11 at 7:43

1 Answer 1

You should be using VGA mode, not Safe mode.

  • Safe mode: Your system is bootstrapped using the generic VGA device driver, vga.sys, which of course doesn't know how to take advantage of whatever non-VGA capabilities your display adapter has in the first place.
  • VGA mode: Your system is bootstrapped using the proper, installed, device driver for your display adapter, but with the display mode forced to a VGA 640×480 8-bit colour mode.

Changing the display resolution used by vga.sys does not change the display resolution used by your actual display device driver. Display resolutions are (of course) per-adapter things, and an adapter driven by the generic VGA driver is not necessarily considered the same as an adapter driven by its proper device driver. Their settings are saved under different names.

Bring up your system in VGA mode, without Safe mode, and then, from the Windows Explorer Control Panel, re-set the display resolution as desired.

share|improve this answer
    
i selected VGA mode in the boot menu but then also the black screen appeared. Finally i got a different size monitor by my friend and then the display became ok and then i decreased the resolution and then changed the monitor again. –  lovesh Nov 3 '11 at 4:49
    
Sometimes the VGA mode doesn't work - which can be a complete pain - and even uninstalling/reinstalling the drivers revives the problem. In these situations (if you've got RDP enabled or VNC) you can remote in and change the resolution - can be a bit problematic but most times it works for us. –  Big Chris Aug 26 at 7:24

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.