Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

The only interface I've found for setting the fan speed with the thinkpad-acpi module, is setting pre-defined levels, 0-7. Example:

sudo su -c 'echo "level 2" > /proc/acpi/ibm/fan'

I would like to set the fan speed by RPM and not by pre-defined levels. Level 2 is 2000 RPM, and level 3 is 3500 RPM. I would like my fan to run at about 2500-3000 RPM (at a certain temperature level, of course). Does a RPM based interface exist?

share|improve this question
add comment

3 Answers

up vote 1 down vote accepted

Seems that it's dependent on the hardware's firmware. As the README page says:

Most ThinkPad fans work in "levels" at the firmware interface. Level 0 stops the fan. The higher the level, the higher the fan speed, although adjacent levels often map to the same fan speed. 7 is the highest level, where the fan reaches the maximum recommended speed.

and

On the X31 and X40 (and ONLY on those models), the fan speed can be controlled to a certain degree. Once the fan is running, it can be forced to run faster or slower with the following command:

echo 'speed <speed>' > /proc/acpi/ibm/fan
share|improve this answer
add comment

TPFancontrol supports fixed RPM:s, see TPFancontrol. It also supports variable fan RPM:s. I have used it on three different Thinkpads (X61s, T400s, T410s) works great.

share|improve this answer
add comment

Thinkfan http://thinkfan.sourceforge.net/ seems to be commonly used (it's mentioned a lot in the lenovo forums) whilst it's not RPM based it does allow switching between the preset fan speed levels based on customisable temperatures.

Additional solutions are listed here:

share|improve this answer
    
As you say, Thinkfan essentially does echo "level 2" > /proc/acpi/ibm/fan too. I've already automated the changing of fan speeds, I just want level 2.5 :) –  August Lilleaas Nov 29 '11 at 15:05
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.