Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I'm planning to assemble my PC.. but want to re-use a little from the old one. I just want to know if it will hamper the performance. I have two 250GB IDE hard drives.

Will it drastically affect the performance if I try and use IDE to SATA convertors for the Hard Drives? And are there new motherboards that still provide more than one IDE ports?

share|improve this question
1  
You should preferably ask one question at a time, as this will get you more precise answers and the question will be more useful for a greater audience. –  slhck Nov 1 '11 at 13:23
    
ok thanks..but I also want to ask the other questions –  Pavitar Nov 1 '11 at 13:28
3  
Sure, just ask them separately. As for the PSU power needed, there are some calculators online already: extreme.outervision.com/psucalculatorlite.jsp –  slhck Nov 1 '11 at 13:30
1  
this really helped! –  Pavitar Nov 1 '11 at 13:37

3 Answers 3

up vote 2 down vote accepted

Marc is slightly incorrect... IDE although an 'old' interface and technology isn't exactly 'slow'.

Some motherboards still have an IDE interface aswell as all the SATA ones, I know i specifically picked one when building my last PC (went for the Asus P5Q) as i had a couple of 500gig PATA drives with data still on.

Performance, it would depend on what you're using the system for, if you where planning on using the 2 IDE drives for storage or where meaning for your OS?

Any gaming/large app's - then steer away from IDE/PATA for your OS.

Just general Office and Web work - you really wouldn't see a huge performance hit.

share|improve this answer
    
I'm a programmer so my work would be more on apps like visual studio,virtual machines ...etc.I just wanted to know if its a good idea,if its not I will just use them for storage and buy a small storage capacity drive which will be sufficient for just the OS, is that ok? –  Pavitar Nov 1 '11 at 13:42
2  
Yes that would be the ideal solution - the only 'bottleneck' would be copying data from IDE to SATA... The data would pass between the 2 controllers as opposed to 1, the actual data transfer speed would still be several hundred MB per min (at least!) :) –  HaydnWVN Nov 1 '11 at 13:46
    
Side note: I've got 1x 'half-SSD' (Seagate Momentus) for my OS, 3x standard SATA drives for data, and 1x IDE drive of old data in my system at home. –  HaydnWVN Nov 1 '11 at 13:49
1  
+1: I agree here. The other two answers are a little out of touch. 1) Your work doesn't sound like it is like it is i/o bound. 2) Having a Sata to IDE converter doesn't affect other SATA drives. –  surfasb Nov 1 '11 at 13:53
    
How is "If you're used to IDE performance, you'll probably be fine" out of touch. I even recommended getting a riser card for IDE to it continues to work if he migrates to another box. –  hbdgaf Nov 1 '11 at 14:17
Will it drastically affect the performance if I try and use IDE to
SATA convertors for the Hard Drives?

Define drastically. If you're used to IDE performance, you'll probably be fine. That being said, IDE is definitely substantially slower than SATA.

And are there new motherboards that still provide more than one IDE ports?

Do they exist? Sure. I would rather get an IDE PCI card though. Just think about the future, you know?

PCI-e is another option too. Just saying.

share|improve this answer
    
um...comment as to why the minus one? –  hbdgaf Nov 1 '11 at 14:13
    
+1, cowards never comment why they downvote. –  Moab Nov 1 '11 at 16:31
    
I'll +1 for mention of a PCI IDE controller for future proofing, if you rename it PCI-e ;) –  HaydnWVN Nov 1 '11 at 16:38
    
added PCI-e as an option...but I really think PCI will outlast multiple IDE slots –  hbdgaf Nov 1 '11 at 17:33
1  
@HaydnWVN valid point. I was thinking from a system builder perspective as opposed to the buying vendor hardware. They tend to have a lot less in terms of expansion slots. –  hbdgaf Nov 2 '11 at 13:57

IDE is going away... It's an old technologie that can't keep up today... In my point of view...

Now for the IDE => SATA converter, I did not recommand it for an everyday use... It could be useful to backup data on an old harddrive, but if it's use on an everyday base for an internal harddrive on wich you'll put an OS, it'll definitely be a bottleneck for your computer... It's like putting a Honda Civic motor into a Ferrari, it just won't keep up...

share|improve this answer
1  
Technically, IDE has been gone a long time (almost a decade). What we still call IDE is really ATA, but has the same physical interface. Modern PATA drives are still pretty fast and won't bottleneck for typical home usage (but might for higher than average IOPS needs for businesses). –  MaQleod Nov 1 '11 at 16:28

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.