Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

USB is keyed so that it can only be plugged into a port a certain way, to ensure that the contacts touch. But what if you either forced it to plug in improperly, or the port itself was worn down and the plug was worn down and you could plug it in backwards? What kind of havoc, if any, would it cause?

share|improve this question
14  
A theoretical question I hope? –  Phoshi Sep 4 '09 at 12:38
4  
A luser would never force it. They'd just get a bigger hammer. –  Les Sep 4 '09 at 13:05
6  
I actually laughed at this question –  Xetius Sep 4 '09 at 14:31
2  
That's funny. I has something similar happen...our co-op put the USB plug into an ethernet port. Surprisingly, the system wouldn't power up and he couldn't figure out why. So, I just jokingly said that he probably plugged the USB into the ethernet port. When I checked, to my surprise, I was right. –  hanleyp Sep 5 '09 at 2:05
    
Come to think of it, maybe just the keyboard didn't work. I'll have to try and see what happens next week. –  hanleyp Sep 5 '09 at 2:08

9 Answers 9

It just wouldn't work.

The contacts are only one one side of the socket/plug so putting the plug in the wrong way round will mean that no connection will be made.

You'll also potentially damage the plug and/or socket so it can't be used again.

I should just add (to answer the final part of the question) that Windows wouldn't warn you because it would have no way of knowing that anything had happened.

share|improve this answer
    
I suppose this is no longer true for USB3 ports as the sockets have contacts on both sides? –  hurikhan77 Mar 19 '10 at 22:36
    
@hurkihan - it looks like the connectors are still on one side. See the images here - apcmag.com/usb_30_connectors_on_display.htm - for example –  ChrisF Mar 20 '10 at 17:29
    
My Windows did once warn me that a power surge had been detected when I broke off my connector. –  BloodPhilia Oct 14 '10 at 10:54

USB device with no en

PQI has a habit removing the outer metal from the USB connector on their USB drives like the one I have above.

It's just as easy to put in "backwards", but as others have pointed out, it simply does not make contact with anything. Thank goodness there's a light on it, so it's easy to tell when I've put it in the right way ;)

share|improve this answer
2  
That must be incredibly annoying. –  Phoshi Sep 4 '09 at 13:35
1  
+1 I have a mini usb drive similar to the one above, but smaller still. SuperTalent does a ton of them like that. It's nice and tiny, but it takes a couple tries to get it right sometimes. –  DHayes Sep 4 '09 at 13:39
1  
It's the price you pay, I guess, for super-small USB drives. –  Keithius Sep 4 '09 at 15:26
1  
And then there are those SD cards with built in USB plugs. –  GameFreak Sep 4 '09 at 22:13
1  
@prestomation -- another nice image you might add to your answer: the foldable connector on a USB rechargeable battery: usbcell.com/product/4 :-) –  Arjan Sep 5 '09 at 8:23

Nothing. It's not symmetrical. No contact would be made.

share|improve this answer

Well the electrical connections would not match up, so I think the worst case would be a short which would likely damage the interface circuitry on the mobo. I doubt it's designed to handle that, because the connectors are keyed. Other than that I think it would be limited to the physical damage to the connectors i.e. they wouldn't work any more.

How persistent did you have to be to get that connector in backwards?

share|improve this answer
1  
..."How persistent"... You won't believe what a stubborn luser can do... There are more than enough stories of 'misplaced' floppies, CD's, memory sticks and other stuff. Personally witnessed several attempts. The only reason the offending persons lived, is that they didn't do it to my computer :) –  Slink84 Sep 4 '09 at 12:45
1  
USB 2.0 is supposed to be fork-resistant. (Fork as in the metallical pointy thing.) So I doubt any physical damage should occur from the shorting. –  grawity Sep 4 '09 at 13:12

USB 2.0 requires that the all trancievers are able to withstand a short-circuit. Unless you have a truly substandard USB implementation it should be fine. It just doens't work backwards.

A fun story is that Microsoft used to torture-test USB by plugging a fork into the socket instead of a proper USB device.

share|improve this answer

Like many already said, usually it's hard to plug it in without force.

However, some manufacturers do have those tiny models, like this Transcend T3, which can be plugged backwards. But, since the contacts are only on one side, so no contact is made, nothing happens. Windows doesn't show any message, since practically, it's not plugged in.

Apart from that, and the fact that I lose them all the time, fantastic little thingies :)

alt text

share|improve this answer
    
There's a hole to tie a mascot to. It will help lose them all the time. ;-) –  hurikhan77 Mar 19 '10 at 22:39

If you connect the usb cable backwards on the motherboard, you could damage your pendrive. I saw this happen. This is a similar case of yours.

Sidenote: I accidentally inserted the headphone's jack into my usb slot (the case is on the floor, the slots are near to the floor and I was blindaiming). Some sparks came out and the OS warned me that something happened to the usb. I don't know if it is working now, because I didn't put in anything after the incident.

share|improve this answer
    
You shorted power and ground--or power and one of the data pins. You probably fried the chip. –  Broam Mar 19 '10 at 23:05

If the plastic spacer inside the PC's USB type A socket breaks, attempting to plug a device into the socket can short the Vcc and GND terminals together, which may damage the motherboard. Breaking the plastic spacer was not unheard of with clamshell cases on Dell Precision Workstations from several years ago: open the clamshell with a device plugged into the front USB port and something's probably going to break (either the device or the socket).

Depending on the mechanical design of the specific type A plug, fumbling around with the plug backwards may also short Vcc to GND. I ran into this once with a type A plug where the shell had two metal fingers that were crimped over the plastic spacer, and these happened to be the same distance apart as the Vcc and GND terminals. This burned up a trace on a motherboard (a generic Pentium board circa 1996; apparently no overcurrent protection for the USB port) and made me much more careful about plugging in keyed connectors.

share|improve this answer
1  
The USB standard requires that all downstream facing ports implement current limits. If shorting VBUS to GND burned out a trace, that MB was not compliant. –  RBerteig Sep 5 '09 at 7:47

An USB connector has just a metal case around it for protection. It has four connectors which will connect the device to your computer. Two of them are just to send power to the device. The other two are to send data to your device. Worst case scenario oif you mix these up? You'd be sending power to the data line, causing it to overload damaging the device. But if those connectors are mixed up, the device is very likely already broken. The mini/micro plugs have a fifth connector, just for grounding the device.

If you open an USB cable, the red cable will contain the 5V power. The white and green cables are for data. The black one is to ground the device so the power can loop around. With a mini/micro USB plug, the fourth connector is used to make distinction between the kind of plug. (USB-A or USB-B.) And... Oh, well... Wikipedia says it all. :-) No use to type everything over from there...

share|improve this answer

protected by studiohack May 3 '11 at 9:36

Thank you for your interest in this question. Because it has attracted low-quality answers, posting an answer now requires 10 reputation on this site.

Would you like to answer one of these unanswered questions instead?

Not the answer you're looking for? Browse other questions tagged or ask your own question.