Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

From this thread, Windows Easy Transfer is a solution to connect two Windows computers over USB to USB, but this software only transfers user settings, documents, and application, all in one step. It is used to migrate a user from one PC to another.

I need a netbook to access the DVD drive of a laptop. The netbook does not have an optical drive.

Is this impossible over a USB-USB cable?

Is it impossible to use USB in the same way ethernet it is used for networking? Why is a USB-USB connection different for computer-computer versus computer to specific devices like printers/scanners etc? A computer is simply not detected as a device, while printers are.

Update: I'm aware I can use a cross-over ethernet cable; I simply don't have one. I will try a normal cable though, at the suggestion below that Windows might detect and update the direct connection.

share|improve this question

3 Answers 3

up vote 2 down vote accepted

Have a read on this article, it does explain allot to things involved with USB to USB networking and an give you insight to what you need to buy.

  • This software. lets you use USB ports over an existing Network. But that is also something else again.

I do however suggest using a cross over cable to connect your two pc's

A guide here

Another proper guide here

One thing to rememeber with this type of network, using computer names will not work (it could- but most likely not) So when mapping drives use the IP Adress not NetBiOS name, the same when browsing. \\192.168.0.1 in explorer bar (not IE)

You can also use ipconfig /all for more verbose detials of the network settings

enter image description here

I would strongly suggest not trying to use USB to USB, because on BIOS based computers do not support this natively.

For example. Using a macintosh, during boot you can use a fire wire cable to connect 2 macs and they can use each other resources without any problem by a press of a button, usually "T" on boot.

USB to USB is a bit like Sisyphus

enter image description here

share|improve this answer
2  
Most PCs and network devices now a days do detect themselves that they are in a "cross over situation" and resolve this by software. You should be fine with a normal network cable. –  BetaRide Dec 16 '11 at 9:36
    
Yes, you should be fine.. but if you want to be sure. Use a cross over –  ppumkin Dec 16 '11 at 9:51
    
If one of the systems is gig e it should do autonegotiation –  Journeyman Geek Dec 16 '11 at 12:33
1  
@BetaRide: AFAIR the auto-crossing feature in mandatory for all Gigabit Ethernet ports. This the reason why most devices support it. –  Robert Dec 16 '11 at 12:38
    
I tried a normal ethernet cable, and switched TCP/IP to automatic settings for both PCs. Their IP addresses became 169.254.54.201 & 169.254.155.14, with 255.255.0.0 subnet mask, but they couldn't ping each other. Does it matter what IP address and subnet mask they have? –  Steve Dec 16 '11 at 12:39

Is there a special reason why you don't want to use a network cable? If both devices on the same WLAN you don't even need a cable.

You can share the DVD drive via the context menu on your laptop and access it as a network drive on your netbook. (Make sure both devices do use the same workgroup name.)

share|improve this answer
    
The special reason is I simply don't have an ethernet cross over cable, and a straight ethernet cable hasn't worked, although I may have set TCP/IP settings incorrectly for that. I can't ping either PC from the other over wireless; see this thread: superuser.com/questions/271343/… –  Steve Dec 16 '11 at 12:44
    
Then you should resolve this problem. The USB cable soltion is not likely to make you happy. –  BetaRide Dec 16 '11 at 14:20
    
Thanks. It was resolved yesterday. –  Steve Dec 17 '11 at 12:57

I found a resource on the web, you can achieve two PC's CD-ROM drive sharing using a USB data link cable, see:Reference1, Reference2

share|improve this answer
2  
Can you summarize the information in your answer in case the links go dead? –  jonsca Nov 16 '13 at 4:05

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.