Super User is a question and answer site for computer enthusiasts and power users. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I had problem in my pc that kept hanging n display pixels were set bad. I removed my both RAMs when power was on(pc was shut down).

After I reinserted them, one of them works and other is not(it beeps when I insert it). I tried it 6-8 times to ensure that it is fitted properly.

Why is this beeping? memory failed due to "power on" or something else?

share|improve this question

closed as too localized by Ƭᴇcʜιᴇ007, Sathya Jan 6 '12 at 10:55

This question is unlikely to help any future visitors; it is only relevant to a small geographic area, a specific moment in time, or an extraordinarily narrow situation that is not generally applicable to the worldwide audience of the internet. For help making this question more broadly applicable, visit the help center.If this question can be reworded to fit the rules in the help center, please edit the question.

The PC got to be unplugged before you start the maintenance measures. – Aki Dec 26 '11 at 15:35

Your mainboard has some voltage on it, if your PC is shutdown but the PSU still switched on. This is to support features like "wake on LAN" and other stuff.

I have often exchanged parts in my computer with the PSU on and nothing happened, but it is always a better idea to switch it completely off, because you can't know which parts are under current while you are removing them. (and this still does not mean that they have to break, but they can. its like defusing a bomb, green cable first)

You can look up what the beep codes tell you, they are normaly a sequence of some long and short beeps that help indicate what is wrong. (bad memory, bad vga etc)

Here is one site, be aware that different BIOS' have different codes,but there are not that many BIOS Vendors and the codes are mostly very similar.

share|improve this answer
My pc works with second I don't think beeps indicate any other problem. – Akash Dec 26 '11 at 15:34
Is there any way to decide that my RAM is now failed that cannot be used again? – Akash Dec 26 '11 at 15:36
Any symptoms that shows failure due to "power on"??? – Akash Dec 26 '11 at 15:37
and turn the PSU off this time :P – Baarn Dec 26 '11 at 15:39
@Akash Walter is not your personal computer support technician. If you have a question, please ask it properly on this site, and provide much more information about it. Use the amount of detail in this question as a template. – Daniel Beck Dec 26 '11 at 16:25

Not the answer you're looking for? Browse other questions tagged .