Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

My motherboard is Gigabyte GA-945PL-S3 and it has 4x SATA 2 ports. I have SATA 1 disk installed and it's slowing my system, I think it is because of its 8mb buffer. I want to upgrade or should I say replace this disk with newer one. For the future I want SATA 3 (maybe for newer motherboards).

I'm confused. If I'm planning to buy a SATA 3 hard drive to use on a SATA 2 port, should I should buy a SATA 2 hard drive for this motherboard instead or there is no difference?

share|improve this question
    
Can you explain how it is slowing down your system? –  mtone Jan 1 '12 at 10:16
    
@mtone When computer starts using HDD (I can hear the disk and led blinking) the computer starts to lagg. –  Little Helper Jan 1 '12 at 12:18

1 Answer 1

up vote 4 down vote accepted

SATA3 Hard Drives are backwards compatible with SATA2 so you could get a SATA3 Drive and use it on a SATA2 controller. However, you need to realize the speed differences of SATA2 and SATA3 and how that compares to speed of Hard Drives. SATA2 can transfer data at 300MBps max while SATA3 can transfer at 600MBps max. However, your typical consumer hard drive speed (7200RPM 3.5") regardless of which interface will not reach the 600MBps speeds. Most of them won't even reach the 300MBps speeds.

Below is an image of the same hard drive using the different interfaces.

http://www.overclock.net/t/898768/wd-caviar-black-640-gb-sata-ii-vs-sata-iii

enter image description here

So it does matter on the hard drive being SATA2 and SATA3 but how much of a difference does it really make?

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.