Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

On Fedora 15, how does one connect a USB Modem (I have a ZTE MF636) over command line?

If I do ps auwx|grep ppp then I can see this command:

/usr/sbin/pppd nodetach lock nodefaultroute ttyUSB2 noipdefault noauth usepeerdns lcp-echo-failure 0 lcp-echo-interval 0 ipparam /org/freedesktop/NetworkManager/PPP/0 plugin /usr/lib64/pppd/2.4.5/nm-pppd-plugin.so

But when I try to run that (even as root) it won't connect the device. Usually I connect from Gnome3's network manager menu.

It just says:

Plugin /usr/lib64/pppd/2.4.5/nm-pppd-plugin.so loaded.
** Message: nm-ppp-plugin: (plugin_init): initializing
** Message: nm-ppp-plugin: (nm_phasechange): status 3 / phase 'serial connection'
Using interface ppp0
Connect: ppp0 <--> /dev/ttyUSB2
** Message: nm-ppp-plugin: (nm_phasechange): status 5 / phase 'establish'
LCP: timeout sending Config-Requests
** Message: nm-ppp-plugin: (nm_phasechange): status 11 / phase 'disconnect'
Connection terminated.
Receive serial link is not 8-bit clean:
Problem: all had bit 7 set to 0
** Message: nm-ppp-plugin: (nm_phasechange): status 1 / phase 'dead'
Modem hangup
** Message: nm-ppp-plugin: (nm_exit_notify): cleaning up


share|improve this question

1 Answer 1

You can try using wvdial. May be this guide can help you http://www.yolinux.com/TUTORIALS/LinuxTutorialPPP.html The following is a tutorial on Zte Mf 180 may it can help you http://christian.amsuess.com/tutorials/zte_mf180/

share|improve this answer
thanks I'll check it out :) –  hamstar Jan 12 '12 at 0:24

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.