Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

Sometimes (not always) when I raise my computer from standby (not hybrid mode), I get BSOD (after a bit, around 30 seconds). This problem exists since when I bought it, around 1 year ago.

I would like to know if there is some solution. I think that the problem is SSD related, but maybe I'm wrong because I've 2-3 issues.

My configuration is this:

  • Windows 7 Ultimate
  • OCZ Revodrive (X1) on PCI Express [SSD]
  • Asus Rampage III Extreme [Motherboard]
  • Nvidia Geforce 560 ti (gainward) [Graphic card]
  • Corsair dominator 6GB (3 slots) [RAM]
  • Corsair Professional Series HX850 850W 80Plus [Power supplier]
  • i7-950 [Processor]
  • 2 Screens (1 on DVI and other on PC cable)

I'm using the SSD as a RAM backup if I exceed my 6GB (only 2GB as suggested on OCZ website); but I think I never reached that limit (I have a G19 and I track my memory consumption on it's screen, and I really never filled up my physical memory) so maybe that's not the problem. Could it be just an incompatibility issue related to the fact that is on PCI-Express? Maybe Windows have some problems with it even with drivers.

The second thing that this may be created from is my graphic card, infact I got a lot of times the message "285.xx" driver has stopped working and has been restarted. While this doesn't happen while I play under heavy load (battlefield 3/skyrim/other heavy games), it happens sometimes when simply using Windows, roaming around my desktop. Also recently Windows stopped to recognize my main screen, to fix it just needed to press Detect under resolution settings, but it's worth a notice.

The third and last thing that this problem may be created from is my power supplier:

When I shutdown my computer if it has been under heavy load it makes a silent noise like whistle which can't be heared if there are other noise, but when you are going to sleep, you can definitely hear it and it's quite boring. The only solution I've found to this is detach my computer from electric supply (by pressing the button 0/1 behind my power supplier).

Maybe the graphic card problem is directly connected with the power supply issue (it doesn't send enough energy?), or maybe the power supply is not working well because the graphic card asks for energy even when computer is shutting down. I really don't know.

That being said, I would like to solve my BSOD problem by understand which is the problem, doesn't matter changing my hardware because I still have warranty, but is boring having a good computer with problems.

Edit 1:

BSOD Minidump:

011212-11419-01.dmp 12/01/2012 06:14:39 BAD_POOL_HEADER 0x00000019 0000000000000003 fffff8a01625a220 59e5cce1ae26b91c fffff8a01625a220 ntoskrnl.exe ntoskrnl.exe+7cc40 NT Kernel & System Microsoft® Windows® Operating System Microsoft Corporation 6.1.7601.17640 (win7sp1_gdr.110622-1506) x64 ntoskrnl.exe+7cc40 C:\Windows\Minidump\011212-11419-01.dmp 8 15 7601 288.248

Human readable version:

Minidump image

Edit 2: I should also point out that the thing about graphic drivers that stopped working is happen more frequently this period, maybe something is "getting worser".

Edit 3: I updated all drivers/bios of the motherboard and so on. It looks like the problem is persisting.

Edit 4: Seems like the graphic card problem is not connected with this one, I fixed with this topic on nvidia forums

Edit 5: It's long time that the problem doesn't show up, I'm not sure it is fixed for some reason (maybe connected with graphic driver and power management?) I'll let you know. Thanks for all help

share|improve this question
    
just wanted to make sure that you do not turn the PSU switch after you put machine into sleep, do you? –  user377178 Jan 12 '12 at 12:16
    
By "RAM backup" did you mean pagefile? –  cmorse Jan 12 '12 at 14:51
    
You should check your SSD firmware, too. I have a SSD from OCZ, too and I had a lot of problems at the beginning. Then I've updated to the latest firmware and everything was fine. –  Feroc Jan 12 '12 at 16:21
    
Ok I'm answering to everyone: @user377178 No, I do it only when I completely shutdown my computer, because in that case the noise is tronger. cmorse: Yes sorry, I meant exactly the pagefile. Feroc: I'll try it tomorrow and tell you results, thanks for suggestion. –  Fire-Dragon-DoL Jan 12 '12 at 22:17
add comment

4 Answers

BAD_POOL_HEADER BSOD almost always indicates a faulty software (e.g. a device driver bug), rather than a faulty hardware. What it says is that an essential internal Windows data structure has been corrupted, and Windows cannot continue. If the BSOD is inconsistent (e.g. you're getting a different code each time), then the code itself is not indicative, obviously.

One needs to use programming tools (kernel debugger, etc.) to analyze the problem and fee which driver is at fault, and this is time-consuming and the success is not guaranteed.

One other thing you can do is to test your memory with memtest86, since faulty memory might be the cause of this kind of BSOD (rare).

My conclusion: Most probably not SSD-related in any way, try updating your drivers (motherboard, graphic card, etc.) and see if it helps.

share|improve this answer
    
Thanks, I'm updating everything and I'll see. –  Fire-Dragon-DoL Jan 12 '12 at 22:18
    
I updated all drivers of my motherboard/graphic card (bios of motherboard too), but the problem is persisting, I must think my graphic card has some problems –  Fire-Dragon-DoL Jan 24 '12 at 23:38
add comment

While it is probably a driver or memory issue, looking at ( http://msdn.microsoft.com/en-us/library/ff557389%28VS.85%29.aspx ) indicates that params 2,3,and 4 in your screencap should be identical.

It is very unusual, but possible, that you have a rootkit or other malware that is inserting something into the pool. It may only cause an issue when resuming the system.

Doesn't hurt to check.

Google terms: "kernel pool exploit"

share|improve this answer
    
Thanks for the suggestion but even with those google terms I find articles on how hacking the problem, not how to solve it. As I can read by the way this could be a driver issue too. –  Fire-Dragon-DoL Jan 28 '12 at 1:18
    
For completeness, the way to solve this problem if you had it would be by removing the rootkit or malware. –  horatio Jan 31 '12 at 15:03
    
I searched with my antivirus and my anti malware software (big scan), and with a rescue cd (that runs from cd) and I couldn't find anything on my computer. If you can suggest some software I can still look with it. But I don't think it was a malware problem now, expecially because energy supply issues can corrupt bits in some way –  Fire-Dragon-DoL Jan 31 '12 at 17:58
    
Thanks for following my question, I tested a lot of times the standby and it seems completely ok now. Seems nvidia bugged a lot my graphic card with that driver, everything it's working now. –  Fire-Dragon-DoL Feb 2 '12 at 14:32
add comment

Tech talk: Dell Inspiron 6400 , ATI Mobility Radeon X1400, Problem start with plan basics, 1.blue screen of death, Make sure you have enough space for air flow to and from by pass port and fan, on bottom side. If there is a over heating issue, have a tech do some maintenance cleaning, ( clean off heat sink cooler ), so air can flow through correctly.

One needs to use programming tools (kernel debugger, etc.) to analyze the problem and figure out which driver is at fault. This is very time-consuming and success is not guaranteed (or even probably in many cases, depending on the skill level of the debugger).

One other thing you can do is to test your memory with Passmark, since faulty memory might be the cause of this kind of BSOD (though it is rare).

My conclusion: Most probably not SSD-related in any way, try updating your drivers (motherboard, graphic card, etc.) and see if it helps.

share|improve this answer
    
Did you tried updating to BETA drivers? I solved my issue with that (now the beta are standard and infact everything is ok). The issue was a bug with power supply to the graphic card in the nvidia drivers. –  Fire-Dragon-DoL Sep 21 '12 at 20:27
add comment
up vote 0 down vote accepted

It looks like the graphic card problem, after it has been fixed, fixed bad pool header problem too.

It's connected with a energy supply issue with the graphic card. Infact there is a bug with latest nvidia drivers (only with 560 ti) that tweak with energy supply in some way when clock is low, making the system unstable.

Thanks for anyone, hopefully they will fix the bug in next driver release.

share|improve this answer
    
The question is old but I want still confirm this, seems that NVIDIA is failing hard on a lot of drivers, I have to keep up to date with beta drivers to avoid issues. This latest version however is not giving me trouble. –  Fire-Dragon-DoL Sep 19 '12 at 22:47
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.