Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I have an LCD screen with a Pixel that is stuck ON (ie bright) what do you suggest to fix it (it's not a dead pixel) Please don't suggest that I fork out $1000 for another one ;-)

share|improve this question
1  
@Matt 'Trouble' Ease, you accepted Molly's answer, did it work? Which method? –  Yar Jan 30 '10 at 10:55
    
I tried almost all of the methods Molly mentioned (with the exception of LCD Scrub) and one of them fixed it. In the end I actually think the simple Pressure Method was what fixed it. Mollys answer blew me away - I have never received a more comprehensive answer to a question in ANY forum on the internet, I was a little overwhelmed by her response and I accidentally down voted her in my fluster!(fixed now) Four months after I asked the question I'm still talking about SA and Mollys answer to my friends - but I must admit, I take the credit for fixing the screen!! –  Matt 'Trouble' Esse Jan 30 '10 at 23:50

5 Answers 5

up vote 96 down vote accepted

Software Method

  1. Try running pixel fixing software. Stuck pixels can often be re-energized by rapidly turning them on and off.

JScreenFix – A web-based Java Applet that randomly turns on and off each pixel at up to 60 times a second to fix stuck pixels.

DPT 2.20 – A Windows application to help locate and identify dead/stuck pixels. Also has a pixel exerciser built in to possibly get lazy pixels working again.

UDPixel 2.1 – A free windows application which help you to locate and fix 1 or more stuck pixels.

LCD Scrub – An $18 Mac-only screensaver that flashes various patterns on the screen to fix burn-in

If this fails, complete the following steps.

Pressure Method

  1. Turn off your computer's monitor.
  2. Get yourself a damp washcloth, so that you don't scratch your screen.
  3. Take a household pen, pencil, screwdriver, or some other sort of instrument with a focused, but relatively dull, point. A very good tool would be a PDA stylus.
  4. Fold the washcloth to make sure you don't accidentally puncture it and scratch the screen.
  5. Apply pressure through the folded washcloth with the instrument to exactly where the stuck pixel is. Try not to put pressure anywhere else, as this may make more stuck pixels.
  6. While applying pressure, turn on your computer and screen.
  7. Remove pressure and the stuck pixel should be gone. This works as the liquid in the liquid crystal has not spread into each little pixel. This liquid is used with the backlight on your monitor, allowing different amounts of light through, which creates the different colors.

Tapping Method

  1. Turn on the computer and LCD screen.
  2. Display a black image, which will show the stuck pixel very clearly against the background. (It is very important that you are showing a black image and not just a blank signal, as you need the backlighting of the LCD to be illuminating the back of the panel).
  3. Find a pen with a rounded end. A Sharpie marker with the cap on should be fine for this.
  4. Use the rounded end of the pen to gently tap where the stuck pixel is - not too hard to start with, just enough to see a quick white glow under the point of contact. If you didn't see a white glow, then you didn't tap hard enough, so use just slightly more pressure this time.
  5. Start tapping gently. Increase the pressure on the taps gradually for 5-10 taps until the pixel rights itself.
  6. Display a white image (an empty text document, or sending your browser to about:blank and going to fullscreen with F11 is good for this) to verify that you haven't accidentally caused more damage than you fixed.

Heat Method

This method is useful if large areas are discolored or even black. Works best with laptops, but may work with separate monitors, too. By using this method, you are exposing your computer to the risk of damaging the processor and/or other components by overheating. If you do this, you should be willing to accept the loss of your computer (for laptops), or monitor (for standalone screens). You should backup your data before trying this method. In particularly bad cases of damage, the effect may not work completely, or the fix may not be permanent.

  1. Turn on the computer.
  2. Make sure it is plugged into wall power.
  3. Go to your power settings in the control panel and set the computer not to go to sleep or standby mode.
  4. Place the laptop in a partially-closed desk drawer or somewhere that is not well-ventilated.
  5. Close the laptop lid almost completely, but don't let it close fully - This will keep the laptop screen turned on indefinitely. You may take a small paper pamphlet or something soft and place it on the keyboard to prevent gravity from closing the lid.
  6. Let the computer sit for several hours or even days in this condition. You may check on it as frequently as you like. The heat generated will cause the liquid crystal to flow more easily into the areas that were not formerly filled.

Tips:

If the pressure and tapping don't work directly on the stuck pixel, start moving outward around the stuck pixel. If you see the pixel flicker while doing this then you know where you can focus the pressure and tapping techniques rather than directly on the pixel.

Many people report success with this technique but these instructions won't work in every case. It may take a few attempts to make sure you are pressing exactly on the stuck pixel. These instructions will fix "stuck" pixels, not "dead" ones. Dead pixels appear black while stuck pixels can be one constant color like red, blue or green. An alternative, but similar technique involves gently massaging the stuck pixel with a warm damp (not wet) soft cloth.

Alternative technique to tapping: Using a rounded pencil eraser, push with moderate pressure into screen at stuck pixel.

If these instructions don't work, you can hopefully get the monitor replaced through your manufacturer. If your monitor falls under the specifications of replacement, get in contact with the manufacturer to set up replacement plans.

Warnings:

Do not attempt to open the monitor as it will void the warranty and the manufacturer will not replace it.

Make sure you don't get any electrical equipment wet or it may break.

Some people claim that touching the screen can cause more pixels to become stuck, although this has not been proven.

LCD Displays are composed of multiple layers. Each layer is separated by very small glass spacers. These spacers and the individual layers are very delicate. Rubbing an LCD panel with a finger or even a cloth can cause the spacers to break and cause further issues beyond the original pixel fault. As such most repair technicians with service certifications are trained not to use the rub or tap methods - use them at your own risk.

Most LCD manufacturer warranties for LCD displays will cover replacement of the panel when the display reaches a certain number of pixel anomalies. These warranties, however, generally will not cover damage caused by rubbing the screen so use extreme caution and contact the manufacturer before proceeding to see if you qualify for repair or replacement.

Article provided by wikiHow, a wiki building the world's largest, highest quality how-to manual. Please edit this article and find author credits at the original wikiHow article on How to Fix a Stuck Pixel on an LCD Monitor. Content on wikiHow can be shared under a Creative Commons License.

share|improve this answer
3  
+1 for such a comprehensive answer –  Kez Sep 9 '09 at 9:56
6  
Wow. Almost makes me wish I had some stuck pixels so I could try this out. Will recommend to a friend who has 8 stuck pixels. –  pelms Sep 9 '09 at 9:57
1  
+1 as well. That's a lot of information! –  alex Sep 9 '09 at 10:12
2  
and you just downvoted this post why? ^^ if you have more and/or better information, feel free to leave a comment or edit the post (if you have enough rep to do so), but this is just riduculous. –  Molly7244 Jan 5 '10 at 16:59
2  
I'd rather see the article copy/pasted with a link to the source as sometimes the source could become a bad link or otherwise inaccessible. –  databyte Nov 17 '11 at 18:38

You could try a "stuck pixel fixer" program, like one of these.

I tried one a few years ago but it didn't fix the pixel unfortunately :-( . Maybe you'll have more luck.

share|improve this answer

There are lots of apps out there that try and sort this by repeatedly changing the colour of the pixel. This web site http://www.jscreenfix.com/basic.php can do it you just put the window with the flashing colours under the stuck pixel then leave it running for several hours. I've heard that this will work with some stuck pixels I've also heard that gentle pressure sometimes works. Personally the one time I had a stuck pixel nothing worked I just had to live with it.

This site lists some other apps as well as a description of how to try the pressure method http://www.makeuseof.com/tag/best-software-solutions-to-fix-a-stuck-pixel-on-your-lcd-monitor/

share|improve this answer

I would advice that you ignore it, I have an old cheap display that has had 4 stuck pixels since new.

It bothered me and I tried a variety of those hoccus pockus methods with no luck at all, from massaging to those weird screen savers.

Considering an average display has around 1 to 2 million pixels then one stuck pixel isn’t that big a deal. Now I don't even notice them.

share|improve this answer
    
I have the same problem with floaters in my right eye (not kidding). The doctor said I'd get used to them, and he was right. –  Yar Jan 30 '10 at 10:57
    
Might be appropriate advice for individual stuck pixels, but clusters are much harder to ignore and this fails to actually answer the question. (Plus, a lot of dead pixels fix very quickly -- <1 second -- so it doesn't take long at all to take a quick stab at it) –  MaulingMonkey Dec 24 '12 at 22:55

I have flicked the LCD screen with the back of my nail on my index finger and found that this fixed the pixel instantly on at least 2 different monitors.

Give it a try, if it doesn't work after 4-10 flicks, I would stop as you probably can't fix that one and will have to resort to one of the other methods suggested.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.