Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I have somewhat idiotic problem which I have never expected to have.

So I accidentally unscrewed bolts on my Intel SSD drive mistakenly thinking they are holding plastic slider which came with laptop.

Funny thing is that after I unscrewed them I can't put them back because they seem longer than needed. And I don't want to put super-pressure on them because of fear of breaking the thread.

Here is the photo of how it looks now:

enter image description here

How come they were fit before? Is it some kind of protection mechanism so I can't hide the fact I removed cover? Now cover is loose because of it. Any ideas?

share|improve this question
1  
Try slowly screwing against the direction you would screw the bolt in and apply soft pressure. After you feel the bolt snapping into its thread (is that the right word?) screw to the other direction. Apply no force though. –  Baarn Jan 29 '12 at 23:22
1  
Probably cross threaded already so the reverse method will have 2 snap positions and it will be hard to tell which is the correct one since the correct one will be hard to screw in due to the cross threading, an ugly situation that is hard to correct on small fine threads. –  Moab Jan 29 '12 at 23:43

1 Answer 1

up vote 6 down vote accepted

Had been in a similar situation a few days back. You can safely apply "some" pressure on the screws. As the screws are quite afar from anything sensitive on the SSD's PCB. The image below is from an X-25M you can check for open images for your specific SSD to confirm the same.

Intel X-25M

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.