Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I am about to put in some new cabling for my new home office and am considering future proofing things a little. So, I'm wondering whether I should run CAT6 cable instead of the CAT5e I have in the rest of my house.

Will the cable still work with my existing patch panel and switch?

share|improve this question

3 Answers 3

up vote 10 down vote accepted

It should work.

You're installing a higher grade cable, but all that will happen is that your equipment will treat it as though it were CAT5e (assuming it can tell the difference of course).

The only issues might arise in the future when you have higher spec routers, switches and computers that can make use of CAT6 but half your network is still CAT5e. The network will run at the speed of the slowest component. How much of a problem that is will depend on what you are doing of course.

share|improve this answer
    
I should be able to pull some CAT6 cable through to replace the existing CAT5e, I just wanted to avoid having to do that in the future. I'm just weighing up my options at the moment. Thanks. –  Antony Scott Feb 26 '12 at 12:08

The difference between Cat5e and Cat6 is in insulation and quality of cable, as such if you follow the same wiring guide it will always work in your environment. Category cables can be purposed for many different things, not just networking. The defining elements are in how it is made and the insulation quality, not in the wiring patterns you use.

In fact, I actually recommend you use just Cat6 going forward. The price difference is marginal, the quality of signal is better, and if you use it with gigabit networking you will see more consistant and higher transfer rates. I run a LAN party larger-scale event and we ONLY use Cat6 as we have a 100% gigabit network. The cost difference is laughable, and because we re-use the cabling, it is totally worth it.

EDIT: Cat5 cable can actually use more than 4 twisted pairs of wires, I assume Cat6 is the same. My previous claim that the wiring count is static is inaccurate, however most wire you can buy is only 4 twisted pairs of wire.

share|improve this answer
    
I'm curious why you say that "the number of wires" is a defining factor, but then you say that they have the same number of wires... –  nhinkle May 2 '12 at 23:05
    
@nhinkle I looked into it further, turns out you can get more than 4 twisted pairs of wire in cat5/e/6 cable, but it is not common at all. Most of the Cat cable you can buy now adays however is 4 twisted pairs of wire. –  BloodyIron May 3 '12 at 13:51

Don't think you need to tear out your Cat5e cabling. Cat5e will support gigabit speeds which is sufficient for most homes today and for the foreseeable future. Higher speeds such as 10 GigE require Cat6.

share|improve this answer
    
I know, I already have gigabit throughout the rest of the house. As it has turned out I'm not running the cables in the walls now, so it's not really a big deal any more. I decided to go for a bit of trunking in the corner and go through the ceiling. So running new cables is trivial now. Not so much for the rest of the house, although I probably won't need 10gigabit speeds anyway :) –  Antony Scott May 2 '12 at 20:39

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.