Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I started my morning with installig windows 8 consumer review on my Virtual Box. I spent 2hrs and still unble to find the solution (How to install it on virtual box I am following this tutorial

Error from Virtual Box: Enable VT-x support!

I googled and found some modification requires in "system->Acceleration" tab setting in virtual box. But "Acceleration" tab is disabled at my end.

I am using x86 platform (I know these system never designed by considering fact of virtualization :( ) need your suggestion to resolve this problem!

Thanks, Vipul

share|improve this question

migrated from stackoverflow.com Mar 2 '12 at 23:54

This question came from our site for professional and enthusiast programmers.

2  
What CPU does your system have? –  Joachim Isaksson Mar 2 '12 at 18:39
    
I assume you are installing it on a virtual box so that you don't need to overwrite your main OS to avoid a re-install? If this is the case then I think your better simply creating a new partition on your drive and installing there, then when your finished playing (won't be long because it still isn't perfect) you can delete the partition. –  Matt Donnan Mar 2 '12 at 19:47
    
@Matt: Thanks. I like your idea! I will give try for that. –  Vips Mar 3 '12 at 3:13

3 Answers 3

I used the same settings as for the previous Win8 version, and it worked. I will list all the settings in the tabs:

(I am translating names from my native language to english, sorry)

System:

  1. Tab mainboard: memory set to 2048 MB (I use 32bit, for 64 use double that), IO APIC is enabled, other checkboxes are unchecked
  2. CPU, 2 cpus, execution cap is set to 100%
  3. Acceleration, botch checkboxes set

Screen:

  1. Video: 16 MB, 3D acceleration enabled, 2d acceleration is off
  2. Remote desktop enabled, this is how I use Win8, VB window sux

Hard Drive:

  1. I use dynamically allocated storage, 43 GB

Sounds:

  1. Defaults

Network:

  1. Bridged card

All the rest is default.

As far as I remember your CPU must support hardware virtualization to make it work.

share|improve this answer
    
Dear Tom, Thanks for your detailed steps. But at my case, System step(3) Acceleration tab is disabled. –  Vips Mar 3 '12 at 4:14

Not all x86 CPUs are created equal when it comes to virtualization. VT-x is an Intel feature that wasn't included in all CPU models.

See http://en.wikipedia.org/wiki/X86_virtualization#Intel_virtualization_.28VT-x.29 and http://ark.intel.com/

share|improve this answer
    
thanks a lot for your exact information. I used Virtual Box user guide. you can see here link (search for "Unfortunately, the x86 platform was never designed to be virtualized") I think, I assumed thing w/o enough searching... Thanks again –  Vips Mar 3 '12 at 4:36

I just did the same thing, but followed this blogs instructions. There are some modifications you need to do to the Virtual Box. I would try the steps described here.

http://www.zdnet.com/blog/btl/virtually-windows-8-how-to-set-up-the-consumer-preview-in-virtualbox/70330

share|improve this answer
    
@EI: thanks for the link. I will get back on this. –  Vips Mar 3 '12 at 4:48

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.