Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I'm running Windows 7 RTM 32-bit.

I'm getting the following error in my event log every second or so:

Session "Circular Kernel Context Logger" failed to start with the following error: 0xC0000035

  • Source: Kernel-EventTracing
  • Level: Error
  • User: SYSTEM
  • OpCode: Start

Any ideas what would be causing this?

share|improve this question
    
I got this x50 from messing around with VM-ware and running virtual Windows 7 x64 inside Windows 7 x64. When this happens, I am forced to restart to get a stable system again. –  user52011 May 3 '11 at 9:37

3 Answers 3

Trying to find out what the Circular Kernel Context Logger is, I found this article in which somebody says:

Nothing to worry about, the system repeatedly tries to start the logger session until it succeeds. A temporary failure to start mostly (but not always) happens during a system state transition from standby -> running.

If this doesn't fit your case, this other article states:

The system state is a set of kernel events generated by taking a snapshot of the Circular Kernel Context Logger.

It's then possible (but improbable in my opinion) that the problem is related to system snap-shots. You might then verify in Control Panel / System / System protection, that everything seems well defined.

If none of the above ideas are useful, my only other idea would be to do a system repair.

share|improve this answer
up vote 0 down vote accepted

I found this post which references the IPv6 protocol. I disabled the protocol for my network adapter and now no longer get the error.

share|improve this answer

Session "Circular Kernel Context Logger" failed to start with the following error: 0xC0000035:

Windows version: Windows 7 64bit

If you are getting this message do as follows:

  1. Start
  2. click All Programs, and then click Accessories.
  3. Right-click Command Prompt, and then click Run as administrator.
  4. Type powercfg -h on, and then press ENTER.
share|improve this answer
1  
It would be helpful to argument why disabling hibernation is a solution for this problem. –  mprill Dec 18 '12 at 19:30

protected by studiohack May 3 '11 at 9:37

Thank you for your interest in this question. Because it has attracted low-quality answers, posting an answer now requires 10 reputation on this site.

Would you like to answer one of these unanswered questions instead?

Not the answer you're looking for? Browse other questions tagged or ask your own question.