Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

Recently my Win7 installation on my SSD went corrupt :(

Now I have to reinstall everything from scratch.

My SSD is 256GB and I took out my optical drive (its a laptop) and put in another hdd of 500gb that is partitioned as 200/200/100 of which I have cleared everything off the first 200 partition.

Can anyone recommend a imaging solution for a total newbie that I can image the 256GB SSD onto the 200GB backup? Most of what I have been googling say you must have a backup at the same size as the drive you want to make the image of or larger :(

Please note I have never done a drive image before so it should be simple.

Thanks!

share|improve this question

put on hold as off-topic by random yesterday

This question appears to be off-topic. The users who voted to close gave this specific reason:

  • "Questions seeking product, service, or learning material recommendations are off-topic because they become outdated quickly and attract opinion-based answers. Instead, describe your situation and the specific problem you're trying to solve. Share your research. Here are a few suggestions on how to properly ask this type of question." – random
If this question can be reworded to fit the rules in the help center, please edit the question.

    
Doesn't Win7 have the ability to image drives built-in? –  martineau Mar 17 '12 at 19:28
    
I dont know... :( does it? –  Ryan Mar 18 '12 at 14:24
1  
Yes, apparently it does. See quickly create a hard drive image in Windows 7. –  martineau Mar 18 '12 at 18:46
1  
Here's another article you might find useful titled The Best Articles for Backing Up and Syncing Your Data. –  martineau Mar 19 '12 at 12:50
    
Thanks dude! I appreciate it! –  Ryan Apr 3 '12 at 13:32

2 Answers 2

up vote 2 down vote accepted

Take a look at DriveImageXML. The private edition is free and I've made good experiences with this software. The image only needs the used space and not the complete space of the partition.

share|improve this answer
    
Thanks! Will try your solution as it's free :) –  Ryan Mar 18 '12 at 14:25

Acronis TrueImage is super easy to use. It can image your drive while you're using your computer, compresses the image by default, and lets you schedule automatic full, incremental, or differential backups.

MSRP is $49, but the full version usually sells online for half that, or even 90% off if you're into rebates.

As for your Windows corruption issue, firmware bugs are notorious for causing data loss on SSDs. You may want to see if there is a firmware update available for your SSD, and install it after you've imaged the drive.

share|improve this answer
    
Thanks! Upvoted you, will check into Acronis... –  Ryan Mar 18 '12 at 14:25

Not the answer you're looking for? Browse other questions tagged or ask your own question.