Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I have an interesting situation at work. I bring my MacBook Pro in from home because it's the most suitable machine for what I do. At work I have access to two networks as follows:

Network 1: Wireless direct to the internet, but cannot access internal servers such as company email which is only accessible internally.

Network 2: Ethernet which gives me access to company servers such as email, but limited access to the internet. For example I cannot access any of my IMAP email servers through it.

This creates a situation where I'm constantly activating and deactivating the wireless to get access to things. If I want my private email I have to activate the wireless to get it. But then I cannot access any company servers such as work email. If I deactivate the wireless I can then access the company servers, but now cannot get to all external servers.

Any suggestions as to how I can configure the system to be able to access both networks and to know which servers are available through each connection? or perhaps to be able to query one connection and then the other if the first says server not found?

share|improve this question
    
Please specify what operating system you use on your Macbook. –  Eroen Mar 20 '12 at 0:52
    
Mac OS X 10.7.n –  drekka Mar 20 '12 at 2:03

2 Answers 2

Have you discusssed with your IT/IS department? The wireless may be configured to only allow external acess unless it is authorized or authenticates properly. One phone call may asssit.

share|improve this answer
    
No, the wireless is not officially supported. The main network is heavy locked down and has done pain in the but proxies as well. So I'm looking to see if there is anything I can do on the Mac to deal with two connections. –  drekka Mar 20 '12 at 2:03
  • Have both nets (interfaces) up
  • route add ... (if this command still exist in OSX) in order to add correct routes to needed nets over correct interface
  • In extremely bad case route change 0.0.0.0 ... in order to change default gateway

Don't fool IT-boys!!!

share|improve this answer
    
That helped a bit. As long as I have the correct IP it routes and I can access the box. But if I don't and need a DNS resolution I get nowhere. I've tried adding files to /etc/resolver but so far they don't seem to be working. –  drekka Mar 20 '12 at 7:10
    
@DerekClarkson - add only specific routes to networks (which you have to pre-identify) and permanent route to IP of external DNS-server –  Lazy Badger Mar 20 '12 at 7:20
    
Not sure I exactly follow that @LB. So far I know the IP of the internal servers and I've been able to setup a route so that anything with that IP goes to the ethernet. The problem I have at the moment is that I cannot get multiple DNS lookups. I've added the internal DNS servers to /etc/resolvers but it does not seem to be working. Still trying to figure out how to debug that. –  drekka Mar 20 '12 at 23:15
    
@DerekClarkson - " multiple DNS lookups" please explain, that is it –  Lazy Badger Mar 21 '12 at 1:20
    
Ahh, ok. I mean configuring the system so that it can use multiple DNS name servers from different providers. for example, the name servers on the company LAN know where the company servers are where as the name servers on the wireless have no idea. This is actually more complicated by the fact that both connections know about <company>.com.au, but I only want the resolution from the ethernet because they are inside the LAN, whilst the wireless one goes to the public site. –  drekka Mar 21 '12 at 5:37

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.