Ok so let me explain, i bought WRT54G and successfully installed DD-WRT v24-sp1 (07/26/08) mini-special - build 9994. That's all ok no problems with it all normal functioning. And just to add (i don't need wireless, wireless is turned off always)
What i want:
ISP's router (TG782) from it's INTERNET port(out) cable "which was before in my pc" is connected to WRT54G's INTERNET port and then from WRT54G LAN port 1 to my pc.
The problem: How do i connect and setup all? I have tried many times on many different ways but cant get it to work IF THE CABLE FROM TG782 IS CONNECTED TO WRT54G ON INTERNET PORT.
If i connect the TG782 to Lan port 1 on WRT54G and my pc to lan port 2 then all works fine after i setup gateway and all. But i want to connect TG782 to Internet port of WRT54G because i need "Access Restrictions" and this only goes through WAN right? please correct me if i am wrong.
What i have tried:
This is how i have tried to setup all. The TG782 router ip is 192.168.1.1
And WRT54G ip is 192.168.1.30 so in WRT54G control panel i have setup like this:
----WAN Connection Type----
Connection Type: Automatic Configuration - DHCP
Local IP Address: 192.168.1.30
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1 (the TG782)
----Network Address Server Settings (DHCP)----
DHCP Type: DHCP Server
Start IP Address: 192.168.1.100
Maximum DHCP Users: 6
And this wont work i probably miss something more, if anyone can help i would be thankfull. Also i have to note that i have tried to set my network adapter on pc to use the gateway of WRT54G and ip 192.168.1.102
In short: i cant get it to work normal only as a switch!
Thanks for any help!
Here is an image which maybe can help: http://img27.imageshack.us/img27/4227/allin1w.jpg