Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I have STB, internet connection with PPPoE and router D-link DIR-615 with dd-wrt. I want to STB ip will be assign from ISP directly. Or set up iptv something different.

P.S. Router is D-link DIR-615 rev. E4

share|improve this question
It's really hard to figure out what problem you're trying to solve. What is the end result you are trying to achieve? – David Schwartz Apr 3 '12 at 10:03
I do not quite understand how to configure vlan for iptv (STB) on the dd-wrt. Forums described this problem with the dlink-320 (also on the dd-wrt). The problem was solved by creating a second wan port for STB with the command switch, but I have this command is not available. I tried various options with the nvram, but nothing has been achieved. – Goozler Apr 3 '12 at 10:28
What problem? We still have no idea what problem you're trying to solve. – David Schwartz Apr 3 '12 at 10:47
The problem is that iptv does not work on TV. Usually a wire from the provider, the wire from the STB and the wire from the wi-fi router connected to an unmanaged switch, which broadcasts multicast packets to all ports. I wanted to do it with only one router. – Goozler Apr 3 '12 at 10:57
are you running the latest version of dd-wrt? if so, what version is it? – Jeremy W Apr 4 '12 at 3:35

From the DD-WRT web page, go to Setup and then VLANs. Choose the port the LAN 1 port (1) and put it in the same VLAN the WAN (W) port is in. (Probably by unchecking VLAN 1 and checking VLAN 2.)

share|improve this answer
I don't have tab VLANs. In the Setup -> Networking there are VLAN tagging, bridging, port setup, etc., but they are all bound to the interfaces (eth0, eth1, ath1, etc) I tried to do it through an SSH client commands nvram set vlan0ports = ... vlan1ports, but have not figured out where each port. The maximum I could do is give the WAN port in the off state. – Goozler Apr 3 '12 at 11:18

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.