Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I have a charger that came with my laptop, which is broken and a Targus APA69 Univeral charger, which is missing the plug.

As I am traveling and short on cash, I decided to attempt to splice the plug from the broken charger with the cable of the Targus charger. Once I cut open the Targus' cable, I found an number of different wires, and have no real idea which is which.

The (six) wires from the Targus charger are:

  • Red
  • White
  • Yellow
  • Blue
  • Green
  • One bare/unsheathed wire

The plug only has two wires, one red and one white.

How can I determine which cables should be connected to (safely) charge my laptop?

share|improve this question
add comment

1 Answer

Since the Targus charger can charge multiple devices (even at once) just by changing the tip, I think that those wires all carry different voltages. I haven't been able to find the color coding of those wires, so I think your only solution is to use a voltage measuring device (or a multimeter) to check all those pairs of cables for the right two that give out the needed voltage for your laptop. I am 90% sure the free/unsheathed wire is the negative/ground wire, so you can start from there.

You need to be careful since playing around with this can fry your laptop. You might be short on cash now, but you'll be a lot shorter if you damage your laptop. If I were you I would just get a new charger.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.