Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

My BT Branded 2-Wire HGV2700 aka "2701HGV" fails to download large files from the playstation store when using my playstation 3

How can I fix this...

Hardware Version: 2701-100589-005 Firmware Version: 6.3.9.63-plus.tm

PS3 says error 80710723

Symptoms:

Playstation store downloads of files over 2GB just get stuck and never finish

share|improve this question

1 Answer 1

There is a bug in the router firmware.

Someone smart has come up with a workaround that avoids having to connect a device directly to the router and use PPPoE... (which is another way of solving it but requires the ps3 to be directly plugged into the router.. not great in a home network situation)

http://bt2700hgv.tripod.com/161.htm

Scroll down to

History of 2+GB file download testing

The bug is in "Enhanced Services (Content screening & Access controls)" it causes regular HTTP downloads of large files to "freeze" midway and never finish. e.g. most movies and Games on the playstation store!!!

The workaround is essence is...

  1. unplug the router
  2. reset it to factory default (removing those "enhanced" services)
  3. configure router offline... block the router from being able to contact BT's "Provisioning servers" so that it can't download any BT services or updates (by setting up static routes to a local address that doesn't exist) ....Blocks all upgrades and communications between hub and BT motive.com servers.
  4. reconnect and configure to connect as normal

Quite clever really whoever thought that one up!

It works!

I'd say this is for "advanced users" only but is a GREAT alternative to buying another router.... and can be quite easily removed again if they ever sort out the firmware to fix this problem....

There were rumours of this being fixed in some of the later v6 firmwares but sadly for me it was still happening on:

Hardware Version: 2701-100589-005 Firmware Version: 6.3.9.63-plus.tm

Just incase the forum link stops working I'll mention the static routes that need to be created to block the router from being able to access the provisioning / update servers:

Now go to Settings → Broadband → Routing page.

Enter the following two static routes. You may use an alternative 'unused' local IP address instead of 192.168.1.250 shown below for your configured LAN:

Subnet IP: 66.193.112.0, Subnet Mask: 255.255.254.0, Gateway IP: 192.168.1.250 Subnet IP: 64.186.176.0, Subnet Mask: 255.255.240.0, Gateway IP: 192.168.1.250

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.