Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I am using a 2008 r2 server to run as my Windows Deployment service. I have imaged successfully desktops. I am now trying to deploy an Image to hp Laptops and am finding that after the imaging has finished and a reboot is required the machine does not come up and starts looping to which it asks for the "Last Known Good" but no matter what is selected it still starts & then reboots without fully booting. I have tried injecting drivers in to the boot image with no luck & I have tried a vanilla boot image with no extra drivers at all and still no luck. The only thing that may be a problem with my boot image is that it is an Enterprise version as none of the HP laptops come with Enterprise recovery disk (for obvious reasons) so may not have some special drivers!

share|improve this question
    
Where did this image come from that you are using to deploy Windows onto the laptops? Did you install Windows first normally onto one of the laptops, make an image of that installation, and use that? Or are you using an image from the desktop installation on the laptops? It sounds as if there is a hardware conflict from drivers in the image that is causing the Laptope to BSOD and restart... just quickly so that you cannot actually see the BSOD. –  Bon Gart May 8 '12 at 1:27
    
No I have built the Laptop from scratch - ie. loaded a Windows 7 Enterprise disk. Built the machine as to how I want it and then sysprep'd it. I have tried capturing the Image 2 ways 1) by booting from a USB stick and using Imagex (I have been using gimagex) and then putting this upto my WDS server. 2) I have been using the Capture Image functionality that teh WDS server can use to capture the image straight to the WDS server. Both ways have meant I have ahd to sysprep the machine first. Sorry what is BSOD? –  Greg Fuller May 8 '12 at 1:50
    
Blue Screen of Death. Standard Windows error screen that will show an error code pointing to what is causing the issue. Windows by default is set to restart upon hitting one of these, and modern equipment is fast enough where most people won't even see it. All the laptops are identical? Actually that shouldn't make a difference after Sysprep... But the fact that it is Enterprise also should make no difference. If you could, you should set up another image from scratch, but BEFORE sysprep, turn off the automatic restart on error feature. –  Bon Gart May 8 '12 at 2:07
    
Duh yeah I should know that one! Yes I didn't click as it did not get that far to show any BSOD as windows had not loaded fully.I will try turning the auto restart off & get back to you. –  Greg Fuller May 8 '12 at 2:32
    
OK I have re-imaged and the BSOD says I have a disk problem - Check for virues on your computer. Remove any newly installed hard drivesor hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer. I have treid restarting and starting in "Safe" mode but it gets to loading disk.sys and then I get the BSOD. I suspect it is an HP problem in the way they access their disk drives but cannot find any drivers or information about it. –  Greg Fuller May 8 '12 at 23:31

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Browse other questions tagged or ask your own question.