My Windows 7 computer hibernates perfectly. The problem appears when I switch it back. The first time around, after BIOS screen, a cursor is seen blinking. And it stays there, forever. I resumes perfectly if I switch the power off and try a second time.
This the error log from > powercfg -energy
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name USB Root Hub
Host Controller ID PCI\VEN_8086&DEV_293A
Host Controller Location PCI bus 0, device 29, function 7
Device ID USB\VID_8086&PID_293A
Port Path
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name Realtek RTL8187B Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter
Host Controller ID PCI\VEN_8086&DEV_293A
Host Controller Location PCI bus 0, device 29, function 7
Device ID USB\VID_0BDA&PID_8189
Port Path 7
How can I fix this so that my computer resumes properly the first time around?
