Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I have a Windows 7 computer which always starts up into "Startup Repair". Startup Repair always fails saying that it cannot repair the computer and then proceeds to shutdown the computer. I have tried Safe Mode and Safe Mode Command Prompt Only. Neither of them let me bypass the startup repair.

Is there any way to bypass the startup repair to at least get to a command prompt? I've googled for this problem and everyone recommends using the following command (but I can't get to a command prompt to execute it):

bcdedit /set {default} recoveryenabled No
share|improve this question
4  
You can use Shift+F10 to enter in command prompt. –  avirk Jun 10 '12 at 18:08
    
Have you the Windows-7 installation disk? –  avirk Jun 10 '12 at 18:19
    
@avirk - no, I don't have access to the Windows 7 disk –  David Jun 10 '12 at 18:32
    
@avirk - Do you mean Shift+F10 during the Startup Repair? I was pressing F8 and choosing Command Prompt from the menu there while booting up. –  David Jun 10 '12 at 18:32
    
Yes I mean during startup repair. Pressing F8 will let you choose the safe mode. –  avirk Jun 10 '12 at 18:38
add comment

1 Answer 1

up vote 3 down vote accepted

You can press Shift+F10 to open the command prompt during the startup repair and can run that command.

I assume that you have the Windows-7 bootable disk. So then its very easy to get back you system working again. Before this enter to bios setup and check that your default boot device is CD/DVD drive, if it is not then set it to your default boot device. Follow the steps given below:

1: Insert the Windows 7 installation disc and restart the PC and press any key when prompted.

2: Select your language preferences and click on Next. Click on Repair your computer.

enter image description here

3: Select which operating system you want to restore and the click on Next.

NOTE: If Windows 7 is not listed here, or it is blank, then it is ok. Click on Next anyway.

4: Select the system recovery option you want to do.

enter image description here

Here you have to select the Command Prompt and then run that command. You can also try the Bootrec /fixmbr and Bootrec /fixboot to fix the problem.

If that doesn't help then you can try few more things as I have found it on seveforum. Just follow these steps after entering in Command Prompt

1: On Command Line acessed the folder with the files that should substitute C:\Windows\System32\Config. To do that, type cd windows, then cd system32, then cd config

2: Type 'dir' to see the files. There were 5 files with the termination .gbck, and 5 files without any termination. They are the following files: DEFAULT, SAM, SECURITY, SOFTWARE and SYSTEM.

3: Rename all the files without termination to .bak one by one. just like that: ren COMPONENTS COMPONENTS.bak (you should do it for the others 4 files)

4: Rename all the .gbck to without termination one by one. just like that: ren COMPONENTS.gbck COMPONENTS (you should do it for the others 4 files)

5: Type dir, to see if the files names were exactly you are expecting to.

6 Restart the PC.

share|improve this answer
    
I think this repair only applies to problems resulting from using Glary Utilities?, other W7 startup repair loop repair is here.....sevenforums.com/tutorials/… –  Moab Jun 10 '12 at 23:18
    
@Moab really a good one from them. But I don't think that this time user had problem of infinity as he marked it solve now. –  avirk Jun 11 '12 at 0:59
1  
glad to meed someone from India here at SuperUser. –  Moab Jun 11 '12 at 1:43
    
@Moab not only me there is a moderator on SU from India and some other user as well. :) –  avirk Jun 11 '12 at 11:17
add comment

protected by Community Jun 10 '13 at 9:09

Thank you for your interest in this question. Because it has attracted low-quality answers, posting an answer now requires 10 reputation on this site.

Would you like to answer one of these unanswered questions instead?

Not the answer you're looking for? Browse other questions tagged or ask your own question.