Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

Is it possible to have the following setup?

2 x SSD (2x128gb) in RAID-0 (for performance)

+

1 x HDD (1x500gb but using 128gb) in RAID-1 (for redudancy)

If so, does the HDD mirror give a decrease of performance in this setup?

I have virtually no experience using RAID in any setup whatsoever, so please forgive my dumbness if applicable.

share|improve this question

1 Answer 1

up vote 1 down vote accepted

That's like a three-drive RAID-10. You'd just stripe the two 128GB SSDs first, then mirror it with the 512GB HDD. This would also leave ~250GB left over on the larger HDD to use for another partition.

I'm not sure particularly what software/hardware would support it, but you could probably do a software RAID from within Windows (diskmgmt.msc).

You would not lose any performance. A RAID-1 mirror actually brings about roughly double sequential/random read speeds (since there's two drives to read from). Writes are slightly slower though, since a copy of data needs to be committed to both drives.

Of course, be aware if the 500GB SSD fails, you lose everything.

share|improve this answer
    
Thanks for the input, however the 500gb is a HDD, not SSD! I have a Gigabyte P35-DS3P motherboard with RAID builtin. 1. Will the mirroring on a HDD make the SSD striping work as fast as the slowest drive, being the HDD mirror? 2. Is it not possible to re-create the mirror from the striped setup when the 500gb HDD fails? –  ropstah Jun 13 '12 at 16:15
1  
I don't think windows software raid supports stacking raid on top of raid, and you would lose a lot of write performance with this setup since writes would have to wait for the slower hdd. –  psusi Jun 13 '12 at 16:20
    
@Bigbio2002: From your last edit I make up that recovering is possible from the striped array? :) –  ropstah Jun 13 '12 at 16:24
    
Yeah, I misread it. In a RAID-1, if one drive fails, all your data is safe on the other drive. Of course, RAID-1 is not a backup solution. As for performance, RAID controllers typically assume that all drives in the RAID have similar performance characteristics. I couldn't say how yours will perform, but probably not as fast as a full SSD. –  Bigbio2002 Jun 13 '12 at 16:28

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.