Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

Is there a way to delete the system reserved partition on windows 7 after the OS is installed? I know it is possible to not install it at all, but I am working with an image and it would be easier to delete it then re-image rather than install the OS and all the software from scratch. Our provisioning system requires a certain partitioning scheme and windows 7 breaks it.

share|improve this question

3 Answers 3

up vote 10 down vote accepted

Yes you can remove the system reserved partition on Windows 7 after the OS installed. When you delete the system reserved partition after the OS is installed you will lose the bootfiles and Windows 7 won't boot. You would need to run Windows 7 Startup repair after you do this.

Detailed instructions for removal of system reserved partition here: http://www.sevenforums.com/tutorials/71363-system-reserved-partition-delete.html

How to run the Startup repair in Windows 7 here: http://www.sevenforums.com/tutorials/681-startup-repair.html

If I were you then I would try it out in a test system first and then proceed with it in actual system.

share|improve this answer
    
Thank you! Great answer and resources. Exactly what I was looking for. –  Kyle Jul 13 '12 at 20:07
    
Ok, I finally got around to doing this (was working on other projects) Unfortunately, the partition numbers remain as 2 and 3 for the 2 partitions I need to keep. I need them to start at partition 1 –  Kyle Jul 20 '12 at 12:52
    
I had to run a System repair after removing the system-reserved Partition on a drive which still had a Windows 8 Installation on it, was mounted on D:, and was not used as the System Partition any more. The machine wouldn't boot any more although using diskpart I only made changes to D:, not to C:. Anyway, System repair fixed the Problem easily. –  Lumi Dec 1 '12 at 12:17

You could use a Linux live boot CD, like Ubuntu. Once running, you can "Disk Utility" or Gparted for a GUI tool, or you can use 'parted' at the command line to remove the partition.

share|improve this answer
    
That's a good idea! I'm pretty familiar with simple linux formatting so I might have to give that a go. I have to get all of the images set up, so it will be a few days before I can do this, thanks for the help! –  Kyle Jul 14 '12 at 20:12

Not with the Disk Management snap-in, but third-party partition-programs can delete it.

Alternately, you can boot into Windows 7 System Recovery and delete it with diskpart: [1][2].

Of course since the system partition is where the bootloader is, you will need to then place it onto the Windows partition (which can also be done from the System Recovery console).

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.