Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

So I purchased a UniComp keyboard and instead of rearranging the keys to try Dvorak I decided I would have them configure the Dvorak layout for me... I was happy with Dvorak at first but I need my typing speed back. Unfortunately, they hard coded it to Dvorak (why they would do this I do not know, as now I cant customise it to any other layout), I need a way to map the Dvorak layout to Qwerty. Preferably this would be through a programmable USB dongle but I would settle for software side. If this I use software, I would need a program for both Windows and Debian that does the mapping.

share|improve this question
    
I imagine that you if do a manual mapping from dvorak to qwerty, that will work... –  soandos Jul 13 '12 at 21:35
add comment

1 Answer

If you're not afraid of opening the keyboard, you might look inside for a jumper or solder-short which chooses dvorak or qwerty layout.

At least that's what I'd look for.

Their prices are pretty low for a buckling spring keyboard, so I'd hazard a guess that the firmware of the keyboard is a jumper or short on the pc-board inside. Remember everyone wants 'least expensive', so making the firmware flip between two mapping tables would be my guess.

You'd have to pop off all the relevant keys and rearrange them, this is Fun! Especially if you can engage a young child to do the keycap replacements. (I had to pay an outrageous cookie fee though)

share|improve this answer
    
I'll try this later this evening. If it works I'll accept your answer :-D Thanks for the tip! –  Crackers Jul 14 '12 at 21:06
    
It's mostly just based on my experience with companies and engineers... just consider them all lazy, looking to make things easier (not that they are thus really). Cheaper to make a pc board with a switch than to make two separate boards, or make custom roms for a (possibly rare) custom request. –  lornix Jul 14 '12 at 21:08
    
Best answer may be delayed on this one... Taking apart the keyboard requires a socket set which I don't have... Rest assured when I am able to test this out, if it works I will select yours. –  Crackers Jul 15 '12 at 0:22
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.