Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

For making a Call Of Duty Server using cod-rcon tool, I have port forwarded the following ports: 28960, 28961, 20500 and 20510 (all ports in UDP). If I use this website to check if the ports are open (in UDP), I find all four are. But if I use this site, it shows all the four ports as closed. I have also disabled my windows firewall (and made exceptions for the program too).

Now, after this setup, when I run the cod-rcon tool, it gives a connection error saying that the port might be down. So, where am I going wrong?

share|improve this question
add comment

1 Answer

UDP scanning is a bit more difficult that TCP scanning as you can not expect to get a response on UDP level (because that depends on the server protocol using the port).

Therefore different UDP scanners using different techniques may come to different results.

If you really want to see if the UDP packets reach your server (for testing port-forwarding) you should use Wireshark and see if UDP packets for the expected ports are seen.

If you don't see such packets it's a problem of your router or internet connection - otherwise it is a local problem of your PC (e.g. firewall).

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.