Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

My ISP provides native IPv6 and it works great when I connect directly with my macbook to the ethernet port. I get a ipv6 assigned and all IPv6-only sites works great.

But when connecting through my Netgear WNR3500L router (running Tomato Firmware v1.28.7496-Toastman) IPv6 enabled sites won't work.

How would I configure my router for this to work? I don't have any "assigned/routed prefix" which the "native ipv6" settings in Tomato require, nor did I receive any settings from my ISP (it just worked).

share|improve this question

1 Answer 1

If your service provider is TekSavvy: You need to register for IPv6 Services by going to www.teksavvy.com/ipv6 They will supply you with new login address and credentials Next, you need to configure Tomato Router Bssic->IPv6 Select DHCPv6 with Prefix Delegation Prefix length:64 Set up a DNS such as 2620:0:ccc::2 and 2620:0:ccd::2 and 2001:4860:4860::8888 Accept RA from WAN To correct a Tomato Bug where random forward routes are generated Administration->Scripts->[Wan Up] Paste the following: echo 0 > /proc/sys/net/ipv6/conf/nvram get wan_iface/accept_raip -6 route flush default dev nvram get wan_ifaceecho 2 > /proc/sys/net/ipv6/conf/nvram get wan_iface/accept_ra

share|improve this answer
    
Welcome to Super User! This is really a comment and not an answer to the original question. To critique or request clarification from an author, leave a comment below their post - you can always comment on your own posts, and once you have sufficient reputation you will be able to comment on any post. –  DavidPostill May 23 at 14:11

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.