Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

Just recently, my Windows 7 computer (Thinkpad T410s) is suddenly doing a lot more disk I/O (as indicated by a light on the case) and randomly freezes for a couple seconds at a time before resuming whatever I was doing. The disk I/O light on my laptop stays solid on while the computer hangs (not flickering, like usual).

  • I have run a CHKDSK on both my drives, no problems.
  • Did a full scan with Microsoft Security Essentials, no viruses
  • Checked the ram with Window's built in memory checker (forget the name), no warnings
  • Did a full test on hardware with Lenovo's ThinkVantage hardware test software, no issues
  • Checked the event log, nothing stuck out as out of the ordinary
  • Updated all the drivers (and bios) to the latest version
  • Emptied disks so they are less than 50% full
  • Did a factory reset of the system, problem still exists
  • Cannot reproduce problem in safe-mode <-- problem now exists in safe-mode

This is especially weird, since after the factory reset, the problem still exists. I was wondering if anybody has any insight as to what this might be; I'm stumped.

Many thanks for your time.

share|improve this question
Suspect hard drive is my first guess. If you can, try swapping the drive and see if there's a change in behaviour. – user3463 Aug 3 '12 at 4:10
Would CHKDSK (HD Tune, or similar) detect faulty hard drives? I will test another hard drive as soon as I can, though it may be hard, as 1/8" HDDs are not very commonplace. – Michael Tang Aug 3 '12 at 6:02
I've the exact symptoms and tests... My only one solution was intall Windows 8, the PC was absurdly fast! – Click Ok Aug 3 '12 at 18:56
Super User answer to diagnosing possible HDD problems: – Deltik Aug 3 '12 at 18:56
up vote 1 down vote accepted

I suggest you download a disk checking utility such as the free Acronis version. This will at least hopefully narrow down any issues with the hard drive.

share|improve this answer
Thanks for showing me this tool. It says my boot disk's health is at 20%, the reallocated sectors count failed at 91 (raw: 198), and the reallocation event count is degrading at 100 (raw: 31). Do these warnings indicate a drive failure, and is the problem I am running into characteristic of a drive failure? Many thanks for your time. – Michael Tang Aug 3 '12 at 19:02
The HD is $%^&! Back up, test the back up, and then bin it! – Dave Aug 6 '12 at 7:40
I've purchased a new SSD as a replacement. Worked great setting Windows up, but now the computer freezes for almost a minute at a time (though at further apart intervals). I will run Acronis again and post the results. – Michael Tang Aug 10 '12 at 21:20
It says my brand new SSD is at 80% health (Soft read error degrading). Should my drive be at such low health (threshold for warning is 70%) if it's brand new? – Michael Tang Aug 10 '12 at 21:25
I can mark an answer, though I don't believe this issue is resolved. – Michael Tang Aug 10 '12 at 22:09

If its at 20% the hard drive is going fail very soon . Get a new hard drive now , and backup all your files( you can use a hard drive dock for this) .

Reinstall the OS on a new hard drive and you should be good .

share|improve this answer
Yes, I've ordered a new drive (mSATA SSD with 1.8" adapter) and will post and update when it comes. – Michael Tang Aug 4 '12 at 4:44

Install the latest Intel Rapid Storage driver, as this is often a cause.

share|improve this answer
That assumes the OP actually has a version of that installed. Unless he is doing windows fake RAID via the BIOS there is no reason to assume this. – Hennes Nov 7 '12 at 20:45
It turns out the AHCI controller was broken (breaking?). Running a linux distribution under compatibility mode for the hard drive controller does not have the same issue (Windows will not run in compatibility mode) – Michael Tang Nov 13 '12 at 9:09

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.