Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

To start off, I am running a Windows Server 2008 32-bit computer, 8 GB ram (well supposedly only 4 GB would be used). This computer is fairly new, and it is extremely fast in running applications and browsing the internet. My problem is that launching a setup in the first place is taking a substantial amount of time. For instance, I could try launching the setup for the Java JDK 7u6, but from the time I launch the setup, it took the computer more than a half hour to start up the setup. The computer, during that 30 minute interval, still runs very smoothly (no difference at all actually), but it is just that the setup launches later than it should be. By the way, it is a half an hour if I am lucky. I have had applications such as Microsoft Office 2010 Trial take multiple hours for it to start to launch. What could possibly be the problem?

share|improve this question
1  
Do you have antivirus installed? If so, disable it and see if that helps. –  user3463 Aug 20 '12 at 17:35
    
@RandolphWest I read about that but I don't have any antivirus –  Sidd Aug 20 '12 at 17:47
add comment

1 Answer

up vote 2 down vote accepted

If you do not have antivirus you can do following

  1. if problem is particularly for JDK setup(other setups are running fine) please check prerequisites and installation procedure.

  2. try to close as many applications as possible before launching setup

  3. try to Run as administrator(Right click and click run as administrator); check How much time it takes to show UAC dialogue.

  4. try to boot computer in safe mode and try to install. if in safe mode its running smoothly may be the problem with some of some installed applications or drivers.

  5. Check event viewer-->Windows-->Applications log. (To run type eventvwr in run and press enter) if it helps to identify the problem.

  6. if still problem is not identified launch task manager and check if the process for
    setup(msiexec or setup.exe)is started. if its started the setup is started but maybe due to some resource or script issue its not proceeding to UI.

Hope this helps..

share|improve this answer
    
This question doesn't really apply to me anymore since I am done with my internship at my workplace, but thank you for answering the question! Hopefully, this might help someone else with a similar problem. –  Sidd Jan 29 '13 at 2:27
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.