Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I recently got an OCZ Vertex 4 SSD. I knew they had very poor reputation when I bought it, but I wanted to get a drive with very high IOPS so I bought it anyway.

Sometimes when the drive is under heavy use such as playing video games it disconnects from the computer. I have noticed that it is extremely warm when it does this.

Is this a built in safety feature, or do I have a bad drive?

share|improve this question
    
I cannot find any specifications that say it does, probably defective. –  Moab Sep 6 '12 at 1:00
    
@Moab: I wouldn't assume that. It's not a particularly tough feature to add. Still, my bet would be repeated ECC (Error Correction Code) failures. All flash drives use those (as do harddisks, BTW). There's already a mechanism to detect and deal with them. Disconnecting would be just the last action in the chain of recovery steps. –  MSalters Sep 6 '12 at 10:50
    
@MSalters I did not assume, I said I could not find any documentation to support it. "probably" is not an assumption, but an opinion until someone can change it with documentation that says otherwise. –  Moab Sep 6 '12 at 14:23

1 Answer 1

  • Haven't seen anybody complaining about heating problems on the Vertex 4. You did mention it gets warm, but warm as in what temperature? If it's between 35°C - 50°C, then I guess the temperature is fine.

  • They have fixed some known issues on the firmware, and since you have a problem, please try upgrading the firmware from here.

  • You should also consider using a SSD diagnostic tool to check your OCZ disk. There are many free tools on the web. If there are issues, it will point them out to you.

  • Some guys on the OCZ community have developed some tools for the SSD. You can get some help here too.

  • You may also want to consider diagnosing your OS, or put the drive onto another computer to see if the problem persists.

  • As a last resort you will have get help from OCZ support.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.