Super User is a question and answer site for computer enthusiasts and power users. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I have a .wmv file that I am trying to upload to Vimeo. The resolution of the video is 1280 x 960, but Vimeo prefers 1280 x 720. How can I change the resolution of the video to meet this guideline?

share|improve this question
up vote 1 down vote accepted

It's a question of whether Vimeo prefers to have standard 720p video or if it will handle your existing source material just fine. If you can use what you have, use that. Re-encoding a video or changing its aspect ratio will always degrade its quality, and this might not be what you want.

If you want to change the resolution to match 720p, you have three options:

  1. Squeezing the video inside the new resolution. You'll have to compress it vertically. This may look awkward depending on the video content but will let the viewer see everything.
  2. Cropping a total of 240 pixels from the video at the top and/or bottom. If there's static content you want to remove, this is a pretty good solution.
  3. Pillarboxing the video, leaving black bars at the left and right edges. Some people don't like this, but this is the only option that won't squeeze the video or remove any content.

You can grab yourself a copy of free, open source and cross-platform Handbrake. Load your source file, and in the Picture Settings, change the output size. You will need to check the Anamorphic » Custom box to allow for other aspect ratios, and you can preview your video to make sure it looks how you want.

Finally, for re-encoding—something you'll have to do when changing the size—you may want to choose a low Rate Factor in the Video Quality preferences:

It's more or less a "quality knob". Lower values mean better quality, higher values mean lower quality. You should choose something between 19 and 24 depending on your source content and desired result.

share|improve this answer

I would recommend (for best results), using video editing software such as sony vegas, imove, windows movie maker, final cut, etc to trim the video to the res you want. in most more advanced editing solutions it is as simple as changing the output settings on the render.

share|improve this answer

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .