Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I am trying to create a multipage document that is basically a long, somewhat complicated checklist. I would like to use the usual headings but would like a 'checkable item / marker' put in front of most headings. I'd like the doc to look like this:

... a random excerpt...

<> 2.4.1 Purchase fresh ingredients blah blah

<> 2.4.1.1 Buy tomatoes blah be sure they are fresh

<> 2.4.1.2 Buy onions blah but not moldy ones ... etc ...

In other words I would like each heading / subheading /subsubheading to have a checkbox in front of the heading, followed by the heading number and then the heading text.

[I know I could do this by hand - but using the automatic heading numbering facility to generate the numbers would save a lot of work (esp. considering the doc will probably be edited numerous times.]

Any ideas on how to get something that looks like a checkbox in front of the automatic numbering?

Thanks!

share|improve this question

2 Answers 2

To have a character or symbol automatically generated in front of automatic level numbering...for example:

 2.4.1 Purchase fresh ingredients blah blah

 2.4.1.1 Buy tomatoes blah be sure they are fresh


  1. Open Define New Multilevel List dialog box. (You can do this by pulling down the menu from the Multilevel List button on the home tab.)

  2. In the Define new Multilevel list dialog box, click the level you would like to modify.

  3. In the Enter Formatting For Number:fill-in box, paste the character(s) or symbol(s) in front of the automatic level number (denoted by gray highlight).

    After you do this you should see both the inserted hard character (not highlighted) and the automatic level number (gray highlighted) in this fill-in box.

  4. Repeat for each level that you wish a box (or other) character to appear in front of the number.

  5. Click OK.

Your automatically numbered levels should automatically generate the character(s) that were formatted in the Define New Multilevel List dialog box.

share|improve this answer

To do this try the following steps:

  1. Right click the heading you want to change (say Heading 1) and click Modify.
  2. At the bottom there is a Format button, click that and select Numbering.
  3. In the Window that pops up select the Bullet tab at the top.
  4. If any of the preset bullets work for you then you're good to go, skip to step 7 in that case, otherwise select Define New Bullet
  5. In the new window that pops up select Symbol, this will show the character selection window.
  6. Find a square box character you can use. I found a reasonable one at 25A1 (you can probably type 25A1 into the Character code: box). Otherwise browse around to find a symbol you like.
  7. Click OK until you are back at the page you are working on.
  8. Select the text you want and click your updated heading in the style list.

For me after doing this I get:

enter image description here

Which seems to fit your requirements quite well.

share|improve this answer
    
This is pretty neat trick. I gotta remember that. –  Darius Sep 19 '12 at 19:26

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.