Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I am trying to take off the keyboard of a Lenovo Thinkpad T400. I have seen several YouTube tutorials, an official video by Lenovo and followed this tutorial. I already removed all screws not only the marked ones.

However the keyboard does not lift up on the right side. It feels as if there is a screw but it is not. Could be that the keyboard has melted with some other component? What am I doing wrong?

share|improve this question
    
In response to your edit...pull harder or try prying it up to see if you can localize the spot where it appears to be stuck? There shouldn't be anything for it to catch on and I seriously doubt something's melted. –  Shinrai Sep 25 '12 at 22:36
    
I fail to see how this is too localized compared to other model-specific questions, of which we have a ton. Was there a policy change I missed? –  Shinrai Sep 26 '12 at 14:26
    
Yeah, this question will apply to many ThinkPads. –  paradroid Sep 26 '12 at 16:02
    
Question reopened, this is not really how "too localized" should be interpreted. –  slhck Oct 6 '12 at 12:36
add comment

1 Answer

up vote 2 down vote accepted

These do come off as advertised - either you missed a screw (should be five total) or it's just stuck to something. I'm not really sure how it would be stuck, though...the newer ones don't require removing the palm rest so they can hang on that lip but this should be wide open.

share|improve this answer
    
He needs to try pushing it upwards (ie. towards the base of the screen). It clicks in under the bottom edge (palmrest). –  paradroid Sep 26 '12 at 0:36
    
@paradroid - That is true on newer systems, but not on the T400. You have to remove the palmrest entirely on these first. (The instructions do indicate that) –  Shinrai Sep 26 '12 at 2:46
    
That's surprising, as that is how the keyboard fitted on my X200s, which is the same generation as the T400. –  paradroid Sep 26 '12 at 13:28
1  
@paradroid - "s" SKUs were a bit different, as that was the first batch of them. The T400s also had that style keyboard, and existed alongside the T400. It wasn't adopted line-wide until the -10 series. –  Shinrai Sep 26 '12 at 14:28
    
Finally, I managed to lift the keyboard with a help of a friend. There is actually a very sticky gum under the keyboard which I had to pull of very hard. It might be that it melted before because of too much heat and therefore became more sticky then normal. Thanks again for everyone's posts. –  JJD May 10 at 22:33
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.