Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

How to disable Windows File Protection in Windows 7 and/or XP from Registry?

I want to automatically replace a driver with my created driver. I used PendingFileRenameOperations key in HKLM\System\CurrentControlSet\Control\Session Manager but I've found that it can ONLY be used for simple (not-system) files, because Windows File Protection disables it for system files (see this post).

Now I need to temporarily disable WFP (and turn it on after changing driver). You can tell me another way to disable it. It can help me too. Any ideas?

share|improve this question
add comment

1 Answer

It cannot be done as silently as you were probably hoping for, mainly because of the debugger requirement:

You may disable WFP by setting the value SFCDisable (REG_DWORD) in HKEY_LOCAL_MACHINE\ SOFTWARE\ Microsoft\ Windows NT\ CurrentVersion\ Winlogon. By default, SFCDisable is set to 0, which means WFP is active. Setting SFCDisable to 1 will disable WFP. Setting SFCDisable to 2 will disable WFP for the next system restart only (without a prompt to re-enable).

Important: You must have a kernel debugger attached to the system via null modem cable (for example:I386kd.exe or Windbg.exe) to use SFCDisable = 1 or SFCDisable = 2.

After WFP is disabled using the SFCDisable = 1 setting, the following message will appear after logon:

Warning! Windows File Protection is not active on this system. Would you like to enable Windows File Protection now? This will enable Windows File Protection until the next system restart. .

Clicking Yes will reactivate WFP until the next system restart. This message will appear at every successful logon until SFCDisable is set to 0.

See here.

Have you considered using devcon or, better yet, pnputil to load your driver from the command line?

share|improve this answer
    
Thanks for devcon and pnputil very much! I will try them. They seem useful. –  SEARAS Sep 25 '12 at 19:52
    
But I can't find HKEY_LOCAL_MACHINE\ SOFTWARE\ Microsoft\ Windows NT\ CurrentVersion\Winlogon\SFCDisable in my Win7. What me do? Will it work if I create new key named SFCDisable? –  SEARAS Sep 25 '12 at 19:53
    
Yes, you can create the value, but I don't think it will do you much good. You have to attach a kernel debugger before setting the value to 1 will actually do anything. –  Kasius Sep 25 '12 at 19:54
    
You mean 'creating SFCDisable' key will work after I attach kernel debugger ? –  SEARAS Sep 25 '12 at 19:59
    
If I am correctly reading the article I quoted, then yes. It should work. It's not like attaching a debugger to other processes though. You have to connect another system to yours. Somebody has to physically connect another machine and run the debugger. See here. –  Kasius Sep 25 '12 at 20:05
show 4 more comments

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.