Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I am trying to install Linux, specifically Lubuntu or BackTrack 5 on an external HDD (Seagate FreeAgent GoFlex) but I have had no luck using YUMI, or UNetbootin to get it working. I do not have a CD to install from.

I want the hard drive to be able to save the data within Linux – as in: if I install a program, it will stay there. I also tried doing this with a flash drive, which does boot, but it does not save data. I tried following Pendrive's tutorial on creating a casper-rw file and adding "persistent" to various files, but I cannot get it to save files.

Basically, I just want a form of Linux on a portable device that will save files and settings between boots.

share|improve this question
add comment

2 Answers 2

up vote 0 down vote accepted

I have tried Slackware, GNU/Debian and Slax on usb drive, and works fine in persistent mode.

So maybe you might try with one of those distributions.

GNU/Debian, specially offer a minimal version that can be installed into a usb drive. Here is

http://cdimage.debian.org/debian-cd/6.0.5-live/i386/usb-hdd/

You can make it booteable executing from a GNU/linux terminal:

dd if=<path-to-img-file> of=/dev/sdX

where X identify your memory stick. Almost always /dev/sda is the hard disk, so usb stick must be /dev/sdb or /dev/sdc or...

NOTE: Your memory stick must have a fat32 partition.

And you will need a extra partition to save your works, which must be labeled as live-rw and can be ext2, ext3, or whatever you want!.

share|improve this answer
    
Found my own solution -- partitioned External, and installed Lubuntu using a LiveUSB install. But I will mark this as best answer as it was useful for the case originally mentioned. –  Moriarty Oct 3 '12 at 23:41
    
When you say: "And you will need a extra partition to save your works, which must be labeled as live-rw and can be ext2, ext3, or whatever you want!." You should explain (just one line, a few words, improves very much) how and when. –  user193726 Jan 29 '13 at 15:38
add comment

On top of sgmarts answer trying using multiboot software for installing it as I find they usually work best for making portable linux with distros with persistence, xboot is one you could use for example, yumi I always found had this flaw.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.