Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I'm currently building a server, and it's exhibiting the weirdest behavior with the hard drive. It is a 2U case, and I have trouble trouble accessing the Seagate SATAIII hard drive when it is in the bottom slot of the hard drive cage. The case is made of galvanized/anodized steel. I thought the drive was DOA, but then I swapped it into the top slot, and the problem was solved--the system had no trouble recognizing the drive anymore!

This got me thinking: Is it possible that the magnetic field from the chassis was affecting the hard drive's functionality? I only have this problem with the mechanical hard drive, not the SSD. Could it be because the chassis is made of steel? I'm baffled.

share|improve this question
    
Are the cables and screws the same? –  Mark Sowul Oct 5 '12 at 0:47
    
What do you mean? –  eek142 Oct 5 '12 at 0:50
    
When you moved the drive, did you use the same screws and cables as when it was in the other bay? –  Mark Sowul Oct 5 '12 at 1:10
    
Yes, identical. –  eek142 Oct 5 '12 at 1:14
1  
Cable possibly has a short and only works when it has a curve in it, or whatever shape it takes when it is up top. Try another cable and see if problem continues. –  ekaj Oct 5 '12 at 2:32

1 Answer 1

Check the data cable. At least in my PC, the very bottom slot would force me to bend the cable near the drive at a bit of a hard angle. Perhaps this is causing a disconnect on one of the contacts.

For that matter, the power cable could cause it as well.

share|improve this answer
    
I'll try the cables. Thanks! –  eek142 Oct 5 '12 at 14:40
1  
I really think it might be the power cable. I realized that it looks like the connectors in the middle of the cable receive power through what looks somewhat like a T-tap connection. Those connections have always failed me in the past. I'm dedicating a new SATA power cable specifically for this hard drive, and I'll report back. –  eek142 Oct 5 '12 at 15:03

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.