Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I have a client who has an issue whereby her Print Spooler on her Windows 7 PC stops after 2 minutes. I have set the service to restart on all subsequent failures, but it still drops out after 2 minutes, restarts after 1 minute, then crashes again after a further 2 minutes. Rinse and repeat.

  • I have updated all printer drivers, and run Windows update.
  • I have scanned for viruses
  • I have run SFC which came up clean.
  • I have tried deleting all the files from within %windir%\windows\system32\spool\printers
  • I have deleted all extra providers from within HKEY_LOCAL_MACHINE\SYSTEM\CURRENTCONTROLSET\CONTROL\PRINT\
  • I have taken ownership of spoolsv.exe

In Turn windows features on or off I have tried unticking Internet Printing Client, ticking LPD Print Service and ticking LPR Port Monitor

This issue has persisted through multiple restarts over the course of a week. I'm hesitant about using a registry cleaner but if it comes down to it, I could potentially be persuaded if nothing else works.

share|improve this question
1  
If you installed and assigned wrong driver to any of the network or local printers the print spooler may exhibit this problem. Basically when the spooler tries to use the driver to query status it crashes and the service stops. This includes messed up 'drivers' for PDF or XPS etc. –  Brian Oct 10 '12 at 11:34

2 Answers 2

up vote 0 down vote accepted

It turns out this was caused by corrupt drivers. The reason I didn't pick up on this earlier is that I downloaded fresh drivers already and it turns out that the drivers on HP's website were the problem. I tried a different driver and that fixed the problem.

I had to delete the printers, delete the driver packages from within Print Management, and delete their definitions from HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Providers\ LanMan Print Services\Servers\Printers\

From there is was a simple reinstallation with alternate drivers.

share|improve this answer

First of all, never use registry cleaners! They don't do anything to your computer that could be considered beneficial. And they especially don't solve any problems whatsoever.

While you have attempted numerous ways to fix your problem, it seems as if you were simply trying solutions instead of analyzing your problem at hand. This can be very problematic as it can create additional problems that may seem related to your initial problem. Some of your mentioned approaches sound a bit risky...

When you detect that a service on your computer stops and starts repeatedly, you should first check the event log.

enter image description here

In the Event Viewer you'll want to find the log for the Print Spooler. It will be logged in the log for the Printer Service, which is located under:

Event Viewer (local)\Applications and Service Logs\Microsoft\Windows\PrintService

Here you'll be able to inspect what problems recently occured with the service:
enter image description here

This has to be your first stop when analyzing such an issue.

There's nothing in the log!

In the case that there is nothing (useful) in the log, you have to take an even closer look at what is going on.

When in doubt, use Process Monitor. Sadly, explaining how to use it to analyze a problem such as this one is far outside of the scope of this answer.

If you want/need to try, I'd recommend watching a Case of the Unexplained.

share|improve this answer
    
The event log just came up with an unexpected error. The registry cleaner would have been the absolute last ditch attempt before reinstalling Windows. I think I have it sorted, but have lost access to the machine. I will post an answer later if it's sorted. –  Miles Hayler Oct 10 '12 at 12:31

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.