Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I would like to know if is it possible (compatible) to use the same cable of a 3.5" HDD for a 2.5" SSD, or in other words, just swap one for another?

share|improve this question
1  
Question is very vague. Please update it to reflect what kind of cable. –  AlanTuring Oct 10 '12 at 18:26

1 Answer 1

Yes this is possible. However, going from a 2.5 to a 3.5 if you're using a laptop will not work, because a 3.5" won't fit.

*NOTE Make sure both connections are SATA or IDE. If they are not, then they are not compatible. The picture shows the difference between the two.

SATA vs. IDE

share|improve this answer
    
My motherboard came with two cables, each designated for either SATA II or SATA III. Are the two cables actually different and would that influence the decision of OP? –  Vian Esterhuizen Oct 10 '12 at 18:25
    
To my knowledge a SATA cable is a SATA cable (the pinouts are no different). I guess cheap ones might not be able to handle the throughput of SATA III without interference though. –  Shinrai Oct 10 '12 at 18:27
    
@Shinrai Yeah I wasn't sure, just thought I'd check. –  Vian Esterhuizen Oct 10 '12 at 18:30
    
Yes these cables are the same, as @Shinrai said the only problem may be the amount of data transfer these can handle. However, unless you have a SSD, this won't matter. SSD's are the only hardware that can fully utilize SATA III –  nathpilland Oct 10 '12 at 18:47

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.