Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

This is an old computer and I require to attach it a monitor (and a keyboard + mouse, I hope usb mouse will still work).

I don't have this cable neither I know the name, I'm too young to remember it, can anyone point me out what's the name of the cable?

Also, is possible to connect a classic vga monitor to this computer, with a converter or something similar?

Monitor

share|improve this question
    
Whenever I've seen a connector like that, it has required an adapter cable which splits out to 2 DVI connectors. –  rob Oct 12 '12 at 19:09

4 Answers 4

up vote 5 down vote accepted

The port is called DMS-59. It was used to make more compact video cards, etc.

From DMS on wikipedia,

"DMS" stands for Dual Monitor Solution. "59" refers to the 59 pins. DMS-59 is generally used for computer video cards. It provides two DVI or VGA outputs in a single connector. An adapter cable is needed for conversion from DMS-59 (digital) to DVI (digital) or VGA (analog), and different types of adapter cables exist. The connector is four pins high and 15 pins wide, with a single pin missing from the bottom row, in a D-shaped shell, with thumbscrews.

Edit:

You can view or buy a compatible adapter on amazon

With some electrical ability (wiring, soldering), you could use the pinout to make your own adapter. You would need to buy a DSUB-9 to wire it as a VGA

share|improve this answer
    
Thanks a lot to everyone, I marked this as answer because I think is the most complete, well presented and amazon link is very appreciated. –  Fire-Dragon-DoL Oct 12 '12 at 19:52
    
Thanks @Fire-Dragon-DoL, I've had to deal with these a lot in a university computer lab. The uncommon interface does make it a bit of a pain to work with (people often assume it is DVI by its appearance). Having to buy a $25ish dongle isn't fun either :-) –  mrchampe Oct 12 '12 at 21:42
    
Yea same here... I thought it was a DVI before discovering the problem. Then I discovered I have to spend around 25€ to buy the splitter >.< –  Fire-Dragon-DoL Oct 12 '12 at 21:58

You'll need a DMS-59 adapter cable, like this one that splits to two DVI-D connectors. Then you can hook up two monitors via any combination of DVI or VGA (though with the DMS-59 to DVI-D cable, each VGA will require a DVI-D to VGA adapter).

share|improve this answer

That's a DMS-59 connector. It's used on work station cards to support two monitors in one output.

Yes you can connect VGA, You will need a convertor to either twin DVI or twin VGA

enter image description here

share|improve this answer

It looks like DMS-59, which appears to provide two VGA and two DVI connectors. So using an electrical converter, your task should be achievable.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.