Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I have a desktop at home with both SAS and SATA ports. (The SAS ports are supplied by a 3ware 9750 card). Currently I have 5 SATA drives connected to these. One small SSD to boot from and four larger drives to hold data.

I now want to add a SAS drive. As far as I know this should just work. However there is a lot of advice not to mix SAS and SATA on the same controllers. I understand that adding a SATA device to a previously pure SAS environment is a bad idea. But I can't find reliable information on the reverse.

Question: Is there any reason not to add a SAS drive to a SAS bus previously containing only SATA drives?

share|improve this question
up vote 2 down vote accepted

You can mix SATA and SAS on the same controller. I do it sometimes. It works best when you have dedicated drive connections (e.g. 4-lane connectors to a non-oversubscribed backplane or to a 4-disk breakout cable).

Just avoid mixing types when a SAS expander is involved. The reasoning? attaching SATA disks to SAS HBAs should work just fine. It's when you add SAS expanders (and SATA Tunneling Protocol) to the mix that you start encountering weird errors with misbehaving SATA disks. SATA simply isn't designed with a switching fabric in mind, and it looks like firmwares still aren't robust enough to deal with command tunneling reliably in the presence of errors.

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.