Super User is a question and answer site for computer enthusiasts and power users. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I would like to use a Wii Remote to control the mouse pointer in Windows 7. Basic left-click, right-click and pointer movement is all I require, although being able to map additional wiimote/nunchuck keys may be useful.

  • Sensor bar: for it to work the Wii has to be on, how do I prevent the Wii from "grabbing" the wiimote, or is this not a problem?
  • Driver: I would like to use an open source or, at a push, free driver, so although widely recommended BlueSoleil is not an option for me.
share|improve this question
Not exactly the same question, but it deals with the same issue: – music2myear Nov 16 '12 at 15:27
@music2myear I think that question is specific to USB-powered sensor bars, I'm asking a much broader question - thanks for your answer btw, as soon as I have a chance to try it out I will accept it – d3vid Nov 26 '12 at 7:34

You need:

  • A light source (the sensor bar, which is a "dumb" device in that it is only powered by the Wii and does not actually report any information back to the Wii.
  • A bluetooth adapter for your computer. This is how the Wiimote communicates to the Wii, or to your computer.
  • Some sites report the Widcomm bluetooth stack ( will handle the communication and it's free from Broadcom, but it doesn't do as good a job as the Blue Soleil, and you'll need to make sure your bluetooth adapter uses a broadcom chip. Basically, start with the drivers that came with your bluetooth device, you probably might need anything else for basic functionality. (
  • Software to translate the Wiimote input into usable "mouse" commands. Howtogeek suggests GlovePie, but when I tried going to their site just now it reports Serbian hacker ( has taken over the page. So I'd stay away from that for a while. I'll update when I find another input conversion software tool.

Now, a note. I learned all this by spending 2 minutes searching on Google.

Many people report the lights are the hardest part. To prevent the Wii from "grabbing" the Wiimote signal, just turn it off. But the Wii is powering the sensor bar, and so turning the Wii off means no sensor bar. There are some manuals that instruct how to "convert" the sensor bar to a wall-powered device, so the Wii doesn't need to be on. Understandably, this will void any warranty on the sensor bar, and it'll probably ruin the bar for use with the Wii.

So, connect the bluetooth adapter and install the drivers. Install the Widcomm stack from Broadcom. Connect the Wiimote. Configure the conversion software.

share|improve this answer
Oh good, it's been unhacked. – music2myear Nov 27 '12 at 14:40 looks compatible – slf Aug 13 '14 at 12:20

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .