Super User is a question and answer site for computer enthusiasts and power users. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I'm working on a big project. We want to create a wireless network throughout the building with 15 floors. My idea is that we should set up one unified wireless access point at least in each case of signal attenuate, we use Access point extender/repeater. I selected DWL-6600AP from among D-Link industrial access points. I want to implement a single wireless LAN throughout the building.

Is it possible to combines multiple DWL-6600 access points to achieving just a single WLAN? Can a wireless switch controller do this task? Can these Access Points interfere with each other? What is the solution? I read D-Link website's learning materials, but I am still confused.

My other question is around the connecting these APs to Wireless Switch Controller - Is it possible to use power line for connecting DWL-6600 to Wireless Switch Controller device?

My main goal is that clients with portable devices such as laptops should be easily connected to the network to share & have communication without any more manual configuration as they are already connected to a single network.

share|improve this question
thank you, i found the answer, i have spent a lot of time to finding a solution to visualizing to how installing & maintaining (specifically securing wireless networks). the explanation is published inside a book written by Cisco. it's name is Implementing Cisco Unified Wireless Networking Essentials...turn over the ebook into 29 page. all necessary information for infrastructural wireless networking are described. – mohsen farahanipoor Nov 20 '12 at 2:34
to making secure your WLAN, just search on google this phrase" Wireless Network intrusion prevention" – mohsen farahanipoor Nov 20 '12 at 2:36

You might have better result with multiple APs on non-overlapping channels sharing the same SSID (i.e. an ESS). The MAC protocol of 802.11 cannot cope very well if you have a large number of stations accessing the same BSS (i.e. single master AP) via repeaters.

Many Wi-Fi clients handle "romaing" between BSSes very well. The crucial point is that the network must handle the switch from one AP to another seamlessly. The base line is that the client's IP must not change and on going connections must not be interrupted at the protocol level. The is easy to achieve (just make all the APs connect to the same LAN and share the same DHCP and NAT server/router). However, to improve the romaing exprience you may need smarter switches that are aware of the location of the clients.

As of your second question, most people would just use PoE. Alternatively you can use a powerline network, but the bandwidth is not very good.

Good reference:

share|improve this answer
could you please explain which switch is appropriated for this purpose? and how about Wireless switch controller? can it be helpful? we have about 200 clients in every floor. – mohsen farahanipoor Nov 17 '12 at 13:54
Yeah, it will probably be branded as a wireless controller or something like that. Could you give the actual brand and model name of the "Wireless switch controller" you're refering to though? – Nov 17 '12 at 13:55 i think DWS-4026 is fine. take a look to it. – mohsen farahanipoor Nov 17 '12 at 14:02
i am not sure a wireless controller can combine APs...what do you think ? – mohsen farahanipoor Nov 17 '12 at 14:03
The mobile station (client) is responsible for detecting and reassociating with APs with a better signal strength. The APs or switches have no control over it. They'll just have to ensure packets are switched to the new AP once the client reassociates. Since most APs buffer frames, a few could be lost when the client associates with another AP in the same network. A romaing-aware switch should then send the frame to the new AP. The documentation of the device you suggested has a section called "Seamless Mobility" which seems to suggest it has such capability. – Nov 17 '12 at 14:12

Also check out the Ubiquity product 'Unifi'

share|improve this answer
Cool, unless the op has already bought someone else's hardware (like the D-Links). – Ƭᴇcʜιᴇ007 Nov 17 '12 at 19:46
Isn't this always the case with StackExchange? Just post an answer and help the masses :) – whardier Nov 19 '12 at 17:14

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .