I'm trying to test a psu, to establish if it is reliable or not. The voltages on the various connectors are ok, but I'd like to know if there's a way to measure the current that flows in the cable during the usage to be sure that the psu can support the pc hardware even when it is under heavy load.
Is there a solution for this?
Thanks for the corrections, I'll try to be a little more precise, I'd like to measure the 18A on the 12V power line, and check that the psu can supply all the 18A, in case the pc is in full load, so that the psu won't power off, because it can't supply all the requested current. Hope this explanation is better than the previous one.