Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I just bought a Samsung 530u3c with Windows 8 installed,so it's a week old. From day one, I have wanted to revert back to Windows 7.

So I have created a USB bootable drive with Windows 7 on, and tried installing it both on the SSD 24GB drive and the 465GB SATA HDD. The laptop will not boot from either drive.

After trying to boot once, the laptop reboots and then presents me with a boot menu that only shows the SATA HDD. Selecting it does nothing.

So I'm losing my mind here. I have absolutely no clue on how to solve this. I'm starting to think i just threw away 700 Euros... :(

Any thoughts on what my next steps should be in troubleshooting the issue?


Installation goes through without problems. All files are copied. By the time the laptop needs to restart, it goes into a boot loop.


I've read somewhere that this behavior has something to do with the reserved Windows partition being created in the SSD. No matter what drive i choose to install on (SSD or HDD), this reserved partition is always created in disk 0 (SSD). Still, i tried installing Windows on both disks and the problem stands.


Exact same thing happens when i try to install Windows 8... :(

share|improve this question
    
Did you run the upgrade assistant? windowsupgradeoffer.com –  Paul Nov 25 '12 at 14:08
2  
Exactly how far into the installation do you get? –  techie007 Nov 25 '12 at 16:23
add comment

3 Answers

Have you tried to unplug the usb stick when it reboots to see if it will just boot straight from the hdd? You could also go into the bios and switch it so that the hdd has boot priority instead of the usb stick. Also make sure you're selecting the right hdd to boot from. It could be stuck in the loop because it's trying to boot off your second drive which has no bootable files on it. Also I'm not sure any of this is what your real problem is. If you did a complete reinstall windows and no just some downgrade or upgrade package then what I mentioned makes sense, but if this is some sort of failed upgrade or downgrade then it sounds like you may need different install files.

If it's actually showing you a boot menu and letting you pick which drive you want it to boot off of, then none of what I said about the usb stick/boot priorities is going to matter.

Can I ask what made you want to revert back to windows 7? Was the system slow/freezing? Was it simply the UI? I'm only asking to make sure this couldn't maybe be hardware related.

share|improve this answer
    
The reason that made me want to revert back to Windows 7 was purely affectional. I deleted partitions and formated both HDD and SSD. Indeed the idea about priorities is no good and yes, i removed the usb stick in order to force the laptop to boot from HDD. If i leave it in, it will boot from usb disk and start a new installation wizard. –  Osvaldo Nov 26 '12 at 12:11
    
Honestly sounds like it's your copy of windows install media. Could have issues on the usb stick too (physical problems with the drive) but I doubt that. Can you try and copy it again or is this the only comp you have? Also, where did the install files come from? Is this what you did -> microsoftstore.com/store/msstore/html/… –  Codezilla Nov 26 '12 at 12:29
    
Yes, i used Windows 7 CD/DVD tool. I had a Windows 7 DVD so i made an iso to use with this tool. Plan was all along to use the DVD but no DVD drive on the Samsung 5 series... –  Osvaldo Nov 26 '12 at 12:49
    
Do you still have the win7 dvd? I'd try that. –  Codezilla Nov 26 '12 at 12:55
    
What? Doing the procedure from scratch? –  Osvaldo Nov 26 '12 at 13:20
show 8 more comments

I had the same problem. I bought a new Samsung NP530U3C-A08TR last weekend, I didn't like Win8 and try to install Win7. Removed all partitions from SSD and Sata HDD. After first restart system wouldn't boot. I used lot of BIOS options, tried Win8 USB Disk to.

I talked with Samsung Offical US Support about this problem. Maybe this guide can help you. I fixed this problem, so follow my guide:

BIOS Options:

  • Fast BIOS Disabled
  • Secure BOOT Disabled
  • CMS BIOS Seleceted

You need Hirens Boot CD (It must have Norton Ghost and Mini WinXP. Check versions 11.X or 15.1 Rebuild edition) on a USB Disk.

  1. Start Windows 7 install from USB Windows 7 Disk.
  2. Remove all partitions from iSSD and Sata HDD.
  3. Install Windows 7 to 24GB iSSD.
  4. On first restart Windows 7 setup (system is stuck normaly on this section), remove Windows 7 USB and use Hirens Boot USB. Start Mini Windows XP.
  5. If you can successfully boot Mini Windows XP, Start Norton Ghost 32 from Hirens Tool
  6. On Norton Ghost, select Copy Disk to Disk and copy iSSD to Sata HDD. After copying, don't restart the system. Only quit Norton from the menu.
  7. Use Partition Wizard from Hirens Tools. Check your new copy SATA HDD status. You must have 100MB System Partiton Active and Primary position, and a second partition for Windows Setup with Primary status.
  8. If all is OK, restart your PC and remove Hirens Boot disk, Windows 7 setup should resume.
share|improve this answer
add comment

For me the magic trick was to unplug and reinsert the usb stick with the win7 installer, after that I was able to select any disk to install win7 to.

share|improve this answer
    
Welcome to SuperUser. can you provide some insight on how that solves the problem? what are the technical impacts from doing so? –  Lorenzo Von Matterhorn Sep 26 '13 at 8:15
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.