Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I have a router d-link dir-300, flashed to dd-wrt v24. By the unknwon reasons web interface not working. Spawning in console httpd, didnt help. Now I need a DMZ ip. How I can setup it with standard ssh session?

share|improve this question

migrated from stackoverflow.com Dec 1 '12 at 8:41

This question came from our site for professional and enthusiast programmers.

    
This site is for programming questions! –  Lee Taylor Nov 30 '12 at 17:09
add comment

1 Answer

This might get more coverage on ServerFault.

However, the preferred way to do this is through the web interface. I assume that you tried going to 192.168.1.1 for your router's web interface and tried to use the interface there. The below link recommends checking iptables if you can't access it for some reason.

http://www.dd-wrt.com/forum/viewtopic.php?p=514123&sid=0403a15d614b80819514b22de0e74528

To answer your actual question, you can set the dmz related variables that are located here:

http://www.dd-wrt.com/wiki/index.php/Factory_Defaults

share|improve this answer
    
Ok, thank. My nvram looks like: root@hellgate:~# nvram show | grep dmz dmz_enable=1 size: 28578 bytes (36958 left) dmz_ipaddr=2 root@hellgate:~# . DMZ ip is 10.0.0.3. I cant find, what I must set in nvram dmz_ipaddr for correct work. Any advices? –  dmage Nov 30 '12 at 21:20
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.