Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I have a new VM host on my network, on a Dell R620.

  • The dedicated iDrac is connected with static IP of: 192.168.3.x
  • NIC #1 is connected to my router
  • The eSXI 5.1 host is with IP of 192.168.3.250
  • The vSphere appliance has a static IP of 192.168.3.241
  • All the clients on the new host are in the same network 192.168.3.x
  • All clients are Windows 2008 R2

My problem is that non of the clients can access the WAN.

  • I can't ping anything which is beyond my router.
  • I CAN ping anything within my router, even if it's on a different subnet - 192.168.0.x (Router rules are in tact and working)
  • I can ping the gateway (192.168.3.254)

One thing that I checked, and is bothering my (but don't know if it has any relevance) is that on the Host Networking properties, there is a vmnic0 (picture) that shows as if it only recognizes 192.168.0.x network - is that so?

vmNIC 0 on the host

The command: route print shows me the following details, where I have a duplicate entry for 0.0.0.0 (and one is wrong) - which is probably also why it's not working

enter image description here

share|improve this question
add comment

1 Answer

up vote 1 down vote accepted

You need to check DNS, it is not configured, I think.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.