Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I trying to install Ubuntu on an iMac. For that purpose I have installed rEFIt and it is trying to boot Ubuntu from my pendrive. Whenever I do so, however, I end up with a black screen saying "Non-system disk".

What am I doing wrong here?

share|improve this question
up vote 1 down vote accepted

If I recall correctly, "non-system disk" is a common error message that's displayed when trying to boot, in BIOS mode, some types of disks that lack BIOS-mode boot loaders. If my memory and analysis are correct, then, rEFIt has tried to boot your flash drive in BIOS mode, but it's not bootable in that way.

Without knowing what version of Ubuntu you're trying to install (both the version number and the type of image you obtained, as in desktop, alternate, Mac-specific, etc.) and how you prepared the flash drive (dd, file-level copy, etc.), it's hard to offer specific recovery recommendations except to go back to the Ubuntu page and follow its instructions precisely on how to prepare your boot medium.

One more comment: Most sources that describe how to install Ubuntu on a Mac describe setting up Ubuntu to boot in BIOS mode. This works, but it's got some serious drawbacks, particularly if Windows is not installed. Specifically, you're forced to use a hybrid MBR, which is a dangerous and standards-violating hack. If possible, it's much better to avoid using a hybrid MBR, but on a Mac, this requires booting in EFI mode rather than in MBR mode. Such a configuration is possible, but it requires setting things up a bit differently, and EFI-mode installs fail to activate some hardware on some models, so it doesn't work acceptably for everybody. I've written a Web page on the topic if you're interested in giving it a try.

share|improve this answer
Do you have any advice for triple booting on a Mac ie adding Windows 8 to the mix ? – Simon Dec 11 '12 at 17:26
Yes: If you need to ask, don't do it. That sounds glib, but triple-booting a Mac requires either a lot of luck or a deep understanding of the issues. – Rod Smith Dec 12 '12 at 1:08
OK Thx for that – Simon Dec 12 '12 at 9:18
I've been following the guide you provided, but when I try to run in rEFInd I get the error "The --shim option is not supported on OS X! Exiting!" – Zlug Dec 14 '12 at 10:05
That's a bug in the 0.5.1 script. Download the version for a fixed script. – Rod Smith Dec 15 '12 at 0:57

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.